N
Nathaniel Burt
Guest
I've tried several times to use an HP4145B Labview driver with my HP
4145A. I've been told that it should work, but every attempt results
in an unresponsive HP 4145A. I have tried pushing every button on the
unit (obviously a last-ditch effort) but have been unable to get it
out of this "frozen" state. Even after disconnecting the HPIB cable
and turning the unit off and on several times, it idles, displaying a
"PLOT()" message when the HPIB cable is connected and some number that
means nothing to me when the HPIB cable is disconnected. Does anyone
know how I can manually reset the 4145A? Thanks.
4145A. I've been told that it should work, but every attempt results
in an unresponsive HP 4145A. I have tried pushing every button on the
unit (obviously a last-ditch effort) but have been unable to get it
out of this "frozen" state. Even after disconnecting the HPIB cable
and turning the unit off and on several times, it idles, displaying a
"PLOT()" message when the HPIB cable is connected and some number that
means nothing to me when the HPIB cable is disconnected. Does anyone
know how I can manually reset the 4145A? Thanks.