HP 3581A LED digits not lighting

F

fazeka

Guest
Hi,

I have a 3581A that was working a few years ago when I purchased it
off eBay (yes, yes, I know).

I went to power it up recently (not having powered it up for about a
year) when
I noticed that the inner two LED digits are not lighting. I'm not
talking about
missing segments, but the inner digits not working altogether:

http://img706.imageshack.us/img706/5645/3581aled.jpg

Working the frequency control I can see the lighted digits changing,
but that's
all.

Is this a repair that is straightforward? I consider myself handy.
Otherwise,
any tips/advice on where to have this thing sent for repair?

Thanks,
Chris
 
fazeka wrote:

Hi,

I have a 3581A that was working a few years ago when I purchased it
off eBay (yes, yes, I know).

I went to power it up recently (not having powered it up for about a
year) when
I noticed that the inner two LED digits are not lighting. I'm not
talking about
missing segments, but the inner digits not working altogether:

http://img706.imageshack.us/img706/5645/3581aled.jpg

Working the frequency control I can see the lighted digits changing,
but that's
all.

Is this a repair that is straightforward? I consider myself handy.
Otherwise,
any tips/advice on where to have this thing sent for repair?

Thanks,
Chris
Can't be much..
Click to expand...
most likely a cable header connection.
 
fazeka wrote:
Hi,

I have a 3581A that was working a few years ago when I purchased it
off eBay (yes, yes, I know).

I went to power it up recently (not having powered it up for about a
year) when
I noticed that the inner two LED digits are not lighting. I'm not
talking about
missing segments, but the inner digits not working altogether:

http://img706.imageshack.us/img706/5645/3581aled.jpg

Working the frequency control I can see the lighted digits changing,
but that's
all.

Is this a repair that is straightforward? I consider myself handy.
Otherwise,
any tips/advice on where to have this thing sent for repair?

Thanks,
Chris
Click to expand...

Here is the service & operation manual:

http://cp.literature.agilent.com/litweb/pdf/03581-90012.pdf


The display circuit is on page 140.


--
Greed is the root of all eBay.
 
On Dec 28, 7:05 am, "Michael A. Terrell" <mike.terr...@earthlink.net>
wrote:
fazeka wrote:

Hi,

I have a 3581A that was working a few years ago when I purchased it
off eBay (yes, yes, I know).

I went to power it up recently (not having powered it up for about a
year) when
I noticed that the inner two LED digits are not lighting. I'm not
talking about
missing segments, but the inner digits not working altogether:

http://img706.imageshack.us/img706/5645/3581aled.jpg

Working the frequency control I can see the lighted digits changing,
but that's
all.

Is this a repair that is straightforward? I consider myself handy.
Otherwise,
any tips/advice on where to have this thing sent for repair?

Thanks,
Chris

   Here is the service & operation manual:

http://cp.literature.agilent.com/litweb/pdf/03581-90012.pdf

   The display circuit is on page 140.

--
Greed is the root of all eBay.- Hide quoted text -

- Show quoted text -
Click to expand...
First suspect is the cable connecting the display to the main board.
Try moving the cabke in and out slightly at each end. Then dig into
the 170 pages of the manual.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top