How To Synchronize FPGAs

[Leroy Tanner]

Hello newsreaders,

For a while I have been confronted with the following task which I find
quite challenging but unfortuantely didn't manage to solve it, yet.
What I want to do is to use 2-4 FPGAs (Xilinx Virtex 2 Pro) together on one
printed circuit board (PCB). They are used to process a large amount of
incoming serial data (data rates of several GHz's). My idea is to handle
that data parallel by the 2-4 FPGAs. But now there arises the problem how to
adequately split the data and how to synchronize the FPGAs among one
another, in particular?
Is it possible or first of all a realistic idea to synchronize multiple
FPGAs in the GHz range? How can this be done without much protocoll
overhead? I would like to do it without applying an extra transfer protocoll
among the FPGAs just for that purpose! Up to this date I didn't find a
proper solution, yet.
Maybe someone can give me a hint? Any ideas how to solve that problem?

Regards, Leroy Tanner

 

[Mike Treseler]

Leroy Tanner wrote:

What I want to do is to use 2-4 FPGAs (Xilinx Virtex 2 Pro) together on
one printed circuit board (PCB). They are used to process a large amount
of incoming serial data (data rates of several GHz's).

What do you intend to do with all that data
once you have it flowing into your fpga?

Maybe someone can give me a hint? Any ideas how to solve that problem?

The problem of receiving GHz serial data includes.

1. Converting the line levels to something you can deserialize.
2. Creating a clock on your board that lines up with the received data.
3. Deserializing the the line data to vectors at a more reasonable frequency
4. Unstuff or decode the line data to find the packet boundaries.
5. Process the data packets.

Note that steps 1,2,3 may have to be done external to your fpga.

-- Mike Treseler

 

[Weng Tianxiang]

You can do it in structure of 2 levels of chips.

First chip will receive all input data stream, then it divides the
input data stream into 4 substreams by any algorithms and output them
to 4 chips and let the 4 chips do any things.

It is simple, reliable and achievable.

Weng

 

[Leroy Tanner]

"Weng Tianxiang" <wtx@umem.com>:

You can do it in structure of 2 levels of chips.

First chip will receive all input data stream, then it divides the
input data stream into 4 substreams by any algorithms and output them
to 4 chips and let the 4 chips do any things.

Nevertheless I have to synchronize the 4 chips in the second level..!!

 

[Don Golding]

Can you be more specific as to what the application is? This question is
too broad ...

Some thoughts:

1) Obviously, all FPGA's are driven by a single clock.
2) Assume you are using 4 FPGA's in parallel, create a 4 bit bus, one line
for each FPGA, which allows all FPGA's to communicate with one another.
This is basically a semaphore flag bus.
3) Each FPGA has a single bi/directional pin which is set to '1' when the
device is ready to process the next step in your algorithm or set to '0'
when busy.
4) When each process is completed within the individual FPGA's, the process
waits for the semaphore bus to be all ones; '1111'.
5) The reset routine initially sets semaphore flag to '0' then performs all
of it's housekeeping tasks, then sets the semaphore to '1'. the next
process waits until the semaphore bus ='1111'.

I hope this helps,
Don



"Leroy Tanner" <ikeepthespiritalive@freenet.de> wrote in message
news:cirg1i$j5q$1@mamenchi.zrz.TU-Berlin.DE...

Hello newsreaders,

For a while I have been confronted with the following task which I find
quite challenging but unfortuantely didn't manage to solve it, yet.
What I want to do is to use 2-4 FPGAs (Xilinx Virtex 2 Pro) together on
one
printed circuit board (PCB). They are used to process a large amount of
incoming serial data (data rates of several GHz's). My idea is to handle
that data parallel by the 2-4 FPGAs. But now there arises the problem how
to
adequately split the data and how to synchronize the FPGAs among one
another, in particular?
Is it possible or first of all a realistic idea to synchronize multiple
FPGAs in the GHz range? How can this be done without much protocoll
overhead? I would like to do it without applying an extra transfer
protocoll
among the FPGAs just for that purpose! Up to this date I didn't find a
proper solution, yet.
Maybe someone can give me a hint? Any ideas how to solve that problem?

Regards, Leroy Tanner