how to setup interface between cadence design frame work and

[ponderboy]

i use ic5033.usr3 and HSPICE2004.09,and i want to use HSPICE simulator
in DFII simualtion ADE.What should i do to use hspice simulator?

 

[Andrew Beckett]

On 26 Mar 2006 23:23:58 -0800, "ponderboy" <cqu_wyx@yahoo.com.cn> wrote:

i use ic5033.usr3 and HSPICE2004.09,and i want to use HSPICE simulator
in DFII simualtion ADE.What should i do to use hspice simulator?

This is a bit of an open ended question. Is your design kit set up to use
hspiceD (or if not, the older hspiceS interface)? If so, select
Setup->Simulator/Dir/Host in ADE, and set hspiceD (or hspiceS) as the simulator.

That's it. You do need to have product 32760 to access the HSPICE interfaces
though. If you're asking how to set up the PDK, then that's a matter of
providing the hspiceD simInfo in the CDF for each component (easiest to look in
analogLib to see how it is done there), and also providing a stopping view
(generally a copy of the symbol, called hspiceD).

Best bet is to read the manual... second best bet is to ask a more precise
question...

Andrew.