how to set the ISP mode for programming CPLD?

[chi]

Hello,


I need to program CoolRunner CPLD using an embedded controller. How to
set the CPLD registers to work in the ISP mode?

Please explain how to do.

Regards,
Chi

 

[Amontec Team, Laurent Gau]

chi wrote:

Hello,


I need to program CoolRunner CPLD using an embedded controller. How to
set the CPLD registers to work in the ISP mode?

Please explain how to do.

Regards,
Chi
just put PORT_EN pin to '1' !

Laurent Gauch
www.amontec.com

 

[chi]

"Amontec Team, Laurent Gauch" <laurent.gauch@amontecDELETEALLCAPS.com> wrote in message news:<3FF94EAF.7070305@amontecDELETEALLCAPS.com>...

chi wrote:
Hello,


I need to program CoolRunner CPLD using an embedded controller. How to
set the CPLD registers to work in the ISP mode?

Please explain how to do.

Regards,
Chi
just put PORT_EN pin to '1' !

Laurent Gauch
www.amontec.com

1. In My design PORT_EN pin is connected to ground. Is it possible to
enable ISP mode through instruction ISPEN command?


thanks and regards
Chi