How to save trace?

[Animesh Maurya]

In the probe window user defined traces are removed when simulation in
restarted or the window in closed.
Is there any trick to save these traces so that they reappear again.

Thanks

 

[Kevin Aylward]

Animesh Maurya wrote:

In the probe window user defined traces are removed when simulation in
restarted or the window in closed.
Is there any trick to save these traces so that they reappear again.

Don't you think that you should tell us all what simulator you are
using?

Kevin Aylward
salesEXTRACT@anasoft.co.uk
http://www.anasoft.co.uk
SuperSpice, a very affordable Mixed-Mode
Windows Simulator with Schematic Capture,
Waveform Display, FFT's and Filter Design.

 

[Jim Thompson]

On 2 Sep 2003 03:44:22 -0700, animesh_m@yahoo.com (Animesh Maurya)
wrote:

In the probe window user defined traces are removed when simulation in
restarted or the window in closed.
Is there any trick to save these traces so that they reappear again.

Thanks

If it's PSpice, it's under Probe Setup, Restore Last Probe Session.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.

 

[Chaos Master]

Kevin Aylward screamed:

Animesh Maurya wrote:
In the probe window user defined traces are removed when simulation in
restarted or the window in closed.
Is there any trick to save these traces so that they reappear again.


Don't you think that you should tell us all what simulator you are
using?

The OP uses PSpice probably, because PSpice uses the concept of 'probe'.

--
E-mail address is fake. Please reply to the group!

 

[Animesh Maurya]

Jim Thompson <Jim-T@golana-will-get-you.com> wrote in message news:<dmd9lvsqb97ut65lp0adgeoh8rf8qdmtpb@4ax.com>...

On 2 Sep 2003 03:44:22 -0700, animesh_m@yahoo.com (Animesh Maurya)
wrote:

In the probe window user defined traces are removed when simulation in
restarted or the window in closed.
Is there any trick to save these traces so that they reappear again.

Thanks

Thanks, you are the only person who easily understands me.

Animesh Maurya.

If it's PSpice, it's under Probe Setup, Restore Last Probe Session.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.

 

[Kevin Aylward]

Animesh Maurya wrote:

"Kevin Aylward" <kevin@anasoft.co.uk> wrote in message
news:<Qo%4b.69$xp4.54@newsfep3-gui.server.ntli.net>...
Animesh Maurya wrote:
In the probe window user defined traces are removed when simulation
in restarted or the window in closed.
Is there any trick to save these traces so that they reappear again.


Don't you think that you should tell us all what simulator you are
using?

Kevin Aylward
salesEXTRACT@anasoft.co.uk
http://www.anasoft.co.uk
SuperSpice, a very affordable Mixed-Mode
Windows Simulator with Schematic Capture,
Waveform Display, FFT's and Filter Design.

Sorry I forgot it. Its one and the only Pspice.

Animesh Maurya

Oh...you poor soul...

Kevin Aylward
salesEXTRACT@anasoft.co.uk
http://www.anasoft.co.uk
SuperSpice, a very affordable Mixed-Mode
Windows Simulator with Schematic Capture,
Waveform Display, FFT's and Filter Design.