How to replace AC converter with battery ?

[Jacquelin Hardy]

Hello group,

I have a Bluetooth serial plug, working with an AC converter that outputs 5V
800mA.

I would like to use the device without the AC supply by using batteries. A
Google search didn't get me nowhere. Can someone help me with this ?
Ideally, I would use the smallest possible rechargeable battery with an
autonomy of 10 hours.

Many thanks

Jacquelin Hardy

 

[Rodney]

"Jacquelin Hardy" <jachardy@videotron.ca> wrote in message
newsiJOe.80068$7b7.710455@weber.videotron.net...

Hello group,

I have a Bluetooth serial plug, working with an AC converter that outputs
5V 800mA.

I would like to use the device without the AC supply by using batteries. A
Google search didn't get me nowhere. Can someone help me with this ?
Ideally, I would use the smallest possible rechargeable battery with an
autonomy of 10 hours.

Many thanks

Jacquelin Hardy
Hi,

If you connect four 1.2 volt NiCd or NiMH batteries in series(end to
end) you will have 4.8 volts which will probably work. If the rating per
battery is 600mA hr( you can get better ones) it will theoretically run for
one hour with 600mA drain or a bit less with 800 mA drain. To get 10 hours
of runtime at 800 mA you will need a battery that will output 800 mA for 10
Hrs. That works out to 8000 mA. For that you will need an 8 amp hour
battery. You will have a problem finding such a thing in a small package.
Maybe someone else has a suggestion.

Rod

 

[mike]

Rodney wrote:

"Jacquelin Hardy" <jachardy@videotron.ca> wrote in message
newsiJOe.80068$7b7.710455@weber.videotron.net...

Hello group,

I have a Bluetooth serial plug, working with an AC converter that outputs
5V 800mA.

I would like to use the device without the AC supply by using batteries. A
Google search didn't get me nowhere. Can someone help me with this ?
Ideally, I would use the smallest possible rechargeable battery with an
autonomy of 10 hours.

Many thanks

Jacquelin Hardy

Hi,
If you connect four 1.2 volt NiCd or NiMH batteries in series(end to
end) you will have 4.8 volts which will probably work. If the rating per
battery is 600mA hr( you can get better ones) it will theoretically run for
one hour with 600mA drain or a bit less with 800 mA drain. To get 10 hours
of runtime at 800 mA you will need a battery that will output 800 mA for 10
Hrs. That works out to 8000 mA. For that you will need an 8 amp hour
battery. You will have a problem finding such a thing in a small package.
Maybe someone else has a suggestion.

Rod

It's tough to get 800ma for one hour out of a 800mAH battery. They're
rated for longer discharge times where they are more efficient.
I'd double your numbers to allow for some degradation over time.
Fully charged batteries can be 6.4V, although I've seen more.
Fully discharged will be closer to 4.0.
I think I'd do some regulation.

Another issue is that the average power drain of the device may be a LOT
lower than the marketing/regulatory number written on the supply.
You have to measure it.
If it's really drawing that much current, you should look into
alternative solutions to your problem...or get a wheeled cart to lug
the batteries around.
mike

--
Return address is VALID but some sites block emails
with links. Delete this sig when replying.
..
Wanted, PCMCIA SCSI Card for HP m820 CDRW.
FS 500MHz Tek DSOscilloscope TDS540 Make Offer
Wanted 12" LCD for Compaq Armada 7770MT.
Bunch of stuff For Sale and Wanted at the link below.
MAKE THE OBVIOUS CHANGES TO THE LINK
ht<removethis>tp://www.geocities.com/SiliconValley/Monitor/4710/

 

[ehsjr]

Rodney wrote:

"Jacquelin Hardy" <jachardy@videotron.ca> wrote in message
newsiJOe.80068$7b7.710455@weber.videotron.net...

Hello group,

I have a Bluetooth serial plug, working with an AC converter that outputs
5V 800mA.

I would like to use the device without the AC supply by using batteries. A
Google search didn't get me nowhere. Can someone help me with this ?
Ideally, I would use the smallest possible rechargeable battery with an
autonomy of 10 hours.

Many thanks

Jacquelin Hardy

Hi,
If you connect four 1.2 volt NiCd or NiMH batteries in series(end to
end) you will have 4.8 volts which will probably work. If the rating per
battery is 600mA hr( you can get better ones) it will theoretically run for
one hour with 600mA drain or a bit less with 800 mA drain. To get 10 hours
of runtime at 800 mA you will need a battery that will output 800 mA for 10
Hrs. That works out to 8000 mA. For that you will need an 8 amp hour
battery. You will have a problem finding such a thing in a small package.
Maybe someone else has a suggestion.

Rod

The Bluetooth won't draw 800 mA - you can't use the
power rating of the AC adapter to figure out the battery
size needed. According to the datasheet here:
http://www.free2move.se/pdf/Datasheet_F2M01C1.pdf
it should draw ~200 mA, peak - at least for the particular
device shown at the site. Without knowing the specifics
of her device, 200 mA peak is a reasonable figure

Assuming 200 mA for 10 hours, a pack made up of 4
2100 mah AA cells seems like it might work.

Ed

 

[Jasen Betts]

In article <oiJOe.80068$7b7.710455@weber.videotron.net>, Jacquelin Hardy wrote:

Hello group,


I have a Bluetooth serial plug, working with an AC converter that outputs 5V
800mA.

I would like to use the device without the AC supply

The easiest way is to steal 5v from a keyboard, joystick, mouse, or USB socket.

by using batteries.

for batteries you're going to need want something like a 7.2V battery and a
5V regulator.

Google search didn't get me nowhere. Can someone help me with this ?
Ideally, I would use the smallest possible rechargeable battery with an
autonomy of 10 hours.

it's probable that the device doesn't use all of the 800ma
that's available from the converter. so it's be hard to pick the right
battery capacity without measuing it's power consumption first.

Bye.
Jasen