How to open the interface GUI of ChipScope Pro Analyzer on l

[Amy_jing]

Hi,

I want to using ChipScope Pro Analyzer to check my design. I have alread
generated the icon and ila cores and connected them with my design. But
am stumbled with how to open the interface GUI of ChipScope on linux.

Dose it have interface GUI on linux? If it has, what`s the commands to ope
it?



---------------------------------------
Posted through http://www.FPGARelated.com

 

[OutputLogic]

Hi,

From the ChipScope user guide:

On 32-bit Linux systems, you can invoke the analyzer from the command
line by running:
<XILINX_ISE_INSTALL>/bin/lin/analyzer
On 64-bit Linux systems, you can invoke the analyzer from the command
line by running:
<XILINX_ISE_INSTALL>/bin/lin64/analyzer

where <XILINX_ISE_INSTALL> represents the location where the Xilinx
ISE Design Suite tools are installed.

For example, default ISE installation on 64-bit machine:
/opt/Xilinx/12.4/ISE_DS/ISE/bin/lin64/analyzer



Thanks,
Evgeni




=======================================
http://outputlogic.com
=======================================

 

[OutputLogic]

One more thing.
Xilinx only supports certain Linux distributions, such as RHEL.
I've seen quite a few problems using ISE GUI tools, such as FPGA
Editor, ChipScope analyzer, on Ubuntu, which is not supported.

Thanks,
Evgeni