HOW TO open a printer HP deskjet 656c?

C

Chris Williams

Guest
Anybody knows how to open an HP deskjet 656c?

Thanks in advance for any help.
 
On 29 Aug 2003 17:57:24 -0700, chriswilliams65@yahoo.com (Chris
Williams) wrote as underneath my scribble :

Anything like this HP660c?
http://www.cag.clara.co.uk
Charlie+
Anybody knows how to open an HP deskjet 656c?

Thanks in advance for any help.
 
Andrew Rossmann <andysnewsreply@no_junk.comcast.net> wrote in message news:<MPG.19bbb6342596c928989787@news.comcast.giganews.com>...
In article <bff4b.120584$0v4.8664892@bgtnsc04-news.ops.worldnet.att.net>,
goblinman48@worldnet.att.net says...
These things snap together, sometimes I want to use a hammer. Look for torx
screws on top and tabs on the bottom. You may have to release several at
one time to get into it. A machine must put these things together.
"

And, if it's like the 695, you need to remove the back cover over the
electronics, and unplug the smaller ribbon cable first (lift latch going
around flat cable up toward the cable, and then the cable should simply
pull out.)

OK. Now I have some ideas. I´ll try them.
I´ll keep you informed.
Thanks.
 

Welcome to EDABoard.com

Sponsor

Back
Top