How to control what parameters are displayed during DC Opera

[ajd]

Hello,

Doing a "Results > Annotate > DC Operating Points" in an ADE session,
puts transistor operating point information on the schematics. The
information displayed is - id, vgs, vds, vth and vdsat. Is there a way
to add more parameters to this list? Say, if I want the gm and gds of
the transistor to be displayed along with all these parameters.


Arnold.

 

[Bernd Fischer]

Yes,

1. Add the parameters in your CELL CDF 'opPointLabelSet', e.g.
opPointLabelSet = "id gm gds vdsat vds vth cgg cgd"

2. Add more 'cdsParam' labels to your CELL symbol.

Bernd

ajd wrote:

Hello,

Doing a "Results > Annotate > DC Operating Points" in an ADE session,
puts transistor operating point information on the schematics. The
information displayed is - id, vgs, vds, vth and vdsat. Is there a way
to add more parameters to this list? Say, if I want the gm and gds of
the transistor to be displayed along with all these parameters.


Arnold.

 

[ajd]

Thanks a lot, Bernd.

On Dec 14, 3:40 pm, Bernd Fischer
<bernd.fisc...@xignalerif.r'4054-50];p5.de> wrote:

Yes,

1. Add the parameters in your CELL CDF 'opPointLabelSet', e.g.
opPointLabelSet = "id gm gds vdsat vds vth cgg cgd"

2. Add more 'cdsParam' labels to your CELL symbol.

Berndajd wrote:
Hello,

Doing a "Results > Annotate > DC Operating Points" in an ADE session,
puts transistor operating point information on the schematics. The
information displayed is - id, vgs, vds, vth and vdsat. Is there a way
to add more parameters to this list? Say, if I want the gm and gds of
the transistor to be displayed along with all these parameters.

Arnold.

 

[ctxuser]

hello,

I tried what Bernd proposed, but the new additional paramaters are not
displayed. What wrong ?

With the command Edit > Component Display > I select parameter and
operating point, the new paramaters I added are also not available to
display.

I look for info into the manuels, and I find something about the
function opParamExprList. Is the right function I need to use in order
to display the value of these paramaters ?

Thanks

ctx

ajd a écrit :

Thanks a lot, Bernd.

On Dec 14, 3:40 pm, Bernd Fischer
bernd.fisc...@xignalerif.r'4054-50];p5.de> wrote:
Yes,

1. Add the parameters in your CELL CDF 'opPointLabelSet', e.g.
opPointLabelSet = "id gm gds vdsat vds vth cgg cgd"

2. Add more 'cdsParam' labels to your CELL symbol.

Berndajd wrote:
Hello,

Doing a "Results > Annotate > DC Operating Points" in an ADE session,
puts transistor operating point information on the schematics. The
information displayed is - id, vgs, vds, vth and vdsat. Is there a way
to add more parameters to this list? Say, if I want the gm and gds of
the transistor to be displayed along with all these parameters.

Arnold.