V
vivek
Guest
Hi
I have a particular grid for all vias . While routing in VCAR
i use minimum cut rule of 2 cuts . After routing the unconnects and
conflicts came to zero. But i saw many grids are in off grid.I can see
those offgrid objects in
view -> visit -> grid -> offgrid vias .
But it is not comming under conflicts. I tried clean many times , but
it didnt clean those off grid vias (via array) . Also i tried giving
Rules -> check -> setup and check ,
but under "setup and check" menu , there is no option for checking
half grid errors for vias .Instead It contains checking "pins off wire
grid".
Is there any option in gui or command to clear via offgrid errors in
vcar. I think that if this via off grid error comes under conflicts
then the router will try to clean thoso offgrid vias.
Thanks with regards ,
VIVEK.
I have a particular grid for all vias . While routing in VCAR
i use minimum cut rule of 2 cuts . After routing the unconnects and
conflicts came to zero. But i saw many grids are in off grid.I can see
those offgrid objects in
view -> visit -> grid -> offgrid vias .
But it is not comming under conflicts. I tried clean many times , but
it didnt clean those off grid vias (via array) . Also i tried giving
Rules -> check -> setup and check ,
but under "setup and check" menu , there is no option for checking
half grid errors for vias .Instead It contains checking "pins off wire
grid".
Is there any option in gui or command to clear via offgrid errors in
vcar. I think that if this via off grid error comes under conflicts
then the router will try to clean thoso offgrid vias.
Thanks with regards ,
VIVEK.