How to change the graph properties in cadence virtuoso simul

[DC_RF]

Dear all,

I am using cadence virtuoso version 6.1.5.
Once the simulation is over, the graph by default is appearing in dash, thin lines.

I want to permanently modify the graph properties for all of my simulation results, like increasing the thickness of the graph, setting the background etc.Can someone please help me in this regard.

Please let me know if my question is not clear or if any other info is required.

Best Regards
DC

 

[yvk]

Hi DC,

Hope this link helps you

http://scytulip.wordpress.com/2011/11/17/default-settings-in-brand-new-cadence-data-plotter/

Regards,
yvk


On Tuesday, January 29, 2013 3:51:23 PM UTC+5:30, DC_RF wrote:

Dear all,



I am using cadence virtuoso version 6.1.5.

Once the simulation is over, the graph by default is appearing in dash, thin lines.



I want to permanently modify the graph properties for all of my simulation results, like increasing the thickness of the graph, setting the background etc.Can someone please help me in this regard.



Please let me know if my question is not clear or if any other info is required.



Best Regards

DC

 

[DC_RF]

Dear yvk,

Thanks for the link. It looks great and simple.
I'll try it for sure and update.

Best Regards
DC

On Tuesday, January 29, 2013 1:34:28 PM UTC+1, yvk wrote:

Hi DC,



Hope this link helps you



http://scytulip.wordpress.com/2011/11/17/default-settings-in-brand-new-cadence-data-plotter/



Regards,

yvk





On Tuesday, January 29, 2013 3:51:23 PM UTC+5:30, DC_RF wrote:

Dear all,







I am using cadence virtuoso version 6.1.5.



Once the simulation is over, the graph by default is appearing in dash, thin lines.







I want to permanently modify the graph properties for all of my simulation results, like increasing the thickness of the graph, setting the background etc.Can someone please help me in this regard.







Please let me know if my question is not clear or if any other info is required.







Best Regards



DC

 

On Tuesday, 29 January 2013 15:34:28 UTC+3, yvk wrote:

Hi DC,

Hope this link helps you

http://scytulip.wordpress.com/2011/11/17/default-settings-in-brand-new-cadence-data-plotter/

Regards,
yvk


On Tuesday, January 29, 2013 3:51:23 PM UTC+5:30, DC_RF wrote:
Dear all,



I am using cadence virtuoso version 6.1.5.

Once the simulation is over, the graph by default is appearing in dash, thin lines.



I want to permanently modify the graph properties for all of my simulation results, like increasing the thickness of the graph, setting the background etc.Can someone please help me in this regard.



Please let me know if my question is not clear or if any other info is required.



Best Regards

DC

Dear yvk

The link is not available anymore, could you please kindly provide another link or pdf version? Thank you !!

 

On Tuesday, 29 January 2013 16:38:56 UTC+3, DC_RF wrote:

Dear yvk,

Thanks for the link. It looks great and simple.
I'll try it for sure and update.

Best Regards
DC

On Tuesday, January 29, 2013 1:34:28 PM UTC+1, yvk wrote:
Hi DC,



Hope this link helps you



http://scytulip.wordpress.com/2011/11/17/default-settings-in-brand-new-cadence-data-plotter/



Regards,

yvk





On Tuesday, January 29, 2013 3:51:23 PM UTC+5:30, DC_RF wrote:

Dear all,







I am using cadence virtuoso version 6.1.5.



Once the simulation is over, the graph by default is appearing in dash, thin lines.







I want to permanently modify the graph properties for all of my simulation results, like increasing the thickness of the graph, setting the background etc.Can someone please help me in this regard.







Please let me know if my question is not clear or if any other info is required.







Best Regards



DC

Dear DC

Did it work? could you please kindly provide some steps in how to achieve that ?

Thank you very much!!