How is Synopsys DC 2004.06-SP2's capability in synthesizing

[Novice]

Hi, there:

My design is 350K gate in ASIC logic, however once I instantiated in 9
blocks
of ASIC RAM of various bits (ranging 2560~8192bits), the gate count DC
gave me was 600K. Now I am perparing for client's inquiries on whether such
design is too large for DC to handle in a top-down synthesis. Is it good to
tell
them the synthesis was OK?

My DC never gave me problems and synthesis time was quite acceptable.

Thanks in advance

 

[michaelst@gmail.com]

Count only related modules. Make hierarchical report and check what is
the problem.

 

[Novice]

<michaelst@gmail.com> wrote in message
news:1142500513.085466.191900@j33g2000cwa.googlegroups.com...

Count only related modules. Make hierarchical report and check what is
the problem.

Thank you. I think, there is no problem in the synthesis. Only that DC gives
a
tens of kilo-gate count to each of the RAMs which are instantiated. These
RAMs are pre-made and delivered as .db format.

I was aware that DC can handle designs up to 250K gates in top-down
synthesis.
Since the RAMs are 300K gates extra, and DC doesn't really optimize these
RAMs,
can I say that the design is nearly within the power of DC?

 

[michaelst@gmail.com]

What do you mean by "power of DC"?

 

[Novice]

<michaelst@gmail.com> wrote in message
news:1142585027.771039.56280@e56g2000cwe.googlegroups.com...

What do you mean by "power of DC"?

During trainings, I was told DC can handle designs up to 250K gates, if a
design is much
larger than that, it's advised to to hierarchical synthesis, meaning
synthesizing individual
modules then combine the netlist and do incremental synthesis.

 

[michaelst@gmail.com]

Our designs are more than 500kGates (without memories). We are using DC
without any problems.