How do I set a Divide-By-N counter High or Low

I need to know how to set the pins on a Divide-By-N counter either High or
Low on a PCB. Also is "1" and "0" the same as high and low?

Can anyone help me?

 

[Rich Grise]

On Wednesday 29 September 2004 06:24 pm, Mac did deign to grace us with the
following:

On Thu, 30 Sep 2004 00:42:48 +0000, elehman1 wrote:

I need to know how to set the pins on a Divide-By-N counter either High
or
Low on a PCB. Also is "1" and "0" the same as high and low?

Can anyone help me?

I'm hesitant to answer this question because it looks like a troll. I
mean, you know what a Divide-By-N counter is, and you use the term PCB,
but you're not sure whether high is the same as 1 and low is the same as
zero?

Anyway, if you are designing the circuit board, connect the pins to VCC
(the positive power supply) to set them high, and connect them to GND
to set them low. And yes, High is the same as 1, and Low is the same as 0.
....

That's odd. I was about to recommend using the "preset" or "clear" inputs.

Cheers!
Rich