E
Electronic Swear
Guest
I have a signal output from a voltage comparator. Topically, its
output voltage is 12V. Now, I would like to use this signal to drive
an IGBT. Of course, if I just direct connect the output pin to the
gate of IGBT, the comparator signal drop down to certain level.
So, how can I add it between the comparator output and the IGBT? The
connection of IGBT is as followed:
311VDC
|
motor
12V signal __|
from ||
comparator o-----||<-- IGBT
output ||__|
|
|
GND
So, how can I connect and add component in between 2 components and
then can drive the IGBT?
output voltage is 12V. Now, I would like to use this signal to drive
an IGBT. Of course, if I just direct connect the output pin to the
gate of IGBT, the comparator signal drop down to certain level.
So, how can I add it between the comparator output and the IGBT? The
connection of IGBT is as followed:
311VDC
|
motor
12V signal __|
from ||
comparator o-----||<-- IGBT
output ||__|
|
|
GND
So, how can I connect and add component in between 2 components and
then can drive the IGBT?