HK Actor - Attn Gareth, Ron and all the usual suspects ...

A

Arfa Daily

Guest
We were talking on here about HK Actors a few months back, when Mr Cook
was having trouble with one. Has anyone got the schematics for the front
end ? I've got a dead urgent one on the bench that has no front end
audio, rather than the usual failed output transistors and fuses.

Doubtless, it's not going to be anything too tricky - they look
straightforward enough - but I can't recall ever having had an input
problem before, and given the amount of stuff that I've got to get fixed
by tomorrow night, a schematic set would be helpful in getting to the
bottom of it quickly.

TIA

Arfa
 
On 10/06/2010 16:27, Arfa Daily wrote:
We were talking on here about HK Actors a few months back, when Mr Cook
was having trouble with one. Has anyone got the schematics for the front
end ? I've got a dead urgent one on the bench that has no front end
audio, rather than the usual failed output transistors and fuses.

Doubtless, it's not going to be anything too tricky - they look
straightforward enough - but I can't recall ever having had an input
problem before, and given the amount of stuff that I've got to get fixed
by tomorrow night, a schematic set would be helpful in getting to the
bottom of it quickly.

TIA

Arfa

Presuming your email addy is correct, it`s on its way. Hope it's the
right one.

Check that the volume control isn't smashed - common fault.

Ron
 
"Ron" <ron@lunevalleyaudio.com> wrote in message
news:HJSdnTY5x-1_jYzRnZ2dnUVZ8m2dnZ2d@bt.com...
On 10/06/2010 16:27, Arfa Daily wrote:
We were talking on here about HK Actors a few months back, when Mr Cook
was having trouble with one. Has anyone got the schematics for the front
end ? I've got a dead urgent one on the bench that has no front end
audio, rather than the usual failed output transistors and fuses.

Doubtless, it's not going to be anything too tricky - they look
straightforward enough - but I can't recall ever having had an input
problem before, and given the amount of stuff that I've got to get fixed
by tomorrow night, a schematic set would be helpful in getting to the
bottom of it quickly.

TIA

Arfa


Presuming your email addy is correct, it`s on its way. Hope it's the right
one.

Check that the volume control isn't smashed - common fault.

Ron
All received OK thanks. Much appreciated. It occurred to me that it might be
the vol control - I've had them damaged before, but it felt ok.
I guess I need to have a closer look in case it's sheared off at the legs.

No need for anyone else to respond with schematics. Ron has sent me them
all.

Arfa
 

Welcome to EDABoard.com

Sponsor

Back
Top