High Voltage DC

[Ed]

Hello,

I would like to make a simple DC power supply capable of giving around 4KV.
The current only needs to be small. Is it possible to make such a power
supply that runs off a 9V battery? If it is, can anyone give me some
pointers on making one, links to schematics would be even better. I'm
hoping I could use an off the shelf transformer, rather than making my own.

Thanks in advance,

 

[Vidor Wolf]

Do a google search for flyback+tesla coil and you'll get loads of hits for a
very popular, very simple one or two transistor high voltage generator.
Here's one link...
http://www.aaroncake.net/circuits/hvgen.htm
With 12V input, you can get around 8KV output.
Add a diode to the outpu and you get 8KV DC.
Reduce input voltage accordingly to get 4KV.
There is also a cct diagram for a 4000volt DC supply in one of Robert
Ianinni's books (He of Information Unlimited fame.)
Cheers.
Mark H.

"Ed" <Ed@nospam.com> wrote in message
news:c6rlnt$437$1@news7.svr.pol.co.uk...

Hello,

I would like to make a simple DC power supply capable of giving around
4KV.
The current only needs to be small. Is it possible to make such a power
supply that runs off a 9V battery? If it is, can anyone give me some
pointers on making one, links to schematics would be even better. I'm
hoping I could use an off the shelf transformer, rather than making my
own.

Thanks in advance,

 

[Joshua Dickerson]

You can also use the inverters from an old disposable photoflash unit
in combination with a cockcroft-walton multiplier. I have some
schematics at http://home.satx.rr.com/worpjr/Physics/HV/high_voltage_cockcroft.htm
If you need help gutting and modifying the inverter, just send me and
e-mail.

The unit i designed and built was for around 9 kV, but you can
scale it down if you want.. The voltage from a CW-multiplier is close
to (Source voltage) * 2 * (Number of stages). The voltage on each
capacitor should be rated at least 2 * Source Voltage: peak to peak,
not RMS.


Best Regards,
- Joshua.

"Ed" <Ed@nospam.com> wrote in message news:<c6rlnt$437$1@news7.svr.pol.co.uk>...

Hello,

I would like to make a simple DC power supply capable of giving around 4KV.
The current only needs to be small. Is it possible to make such a power
supply that runs off a 9V battery? If it is, can anyone give me some
pointers on making one, links to schematics would be even better. I'm
hoping I could use an off the shelf transformer, rather than making my own.

Thanks in advance,