Help with Vertical problem on Toshiba 27" CTV

F

fixer

Guest
Run into a problem. I have this Toshiba CX28519 CTV, had a Vertical problem.
Changed AN5521 with all caps in the stage. Problem still persits. Anybody
with any tricks Please
Thanx
 
fixer:
You need to describe the "Vertical problem" with a few more details........
what was the original problem and why did you change the AN5521 ? Did the
symptoms change at all after installing the new chip ?
Did you check the electrolytics near and around the vertical output
circuitry c3xx series ...... usually c305, c308 and others..... and toward
the center of the pcb a small electrolytic, c301 near the jungle chip?
--
Best Regards,
Daniel Sofie
Electronics Supply & Repair
----------------------------------------------


"fixer" <electroshack@hfx.eastlink.ca> wrote in message
news:hmGBb.117060$PD3.5827977@nnrp1.uunet.ca...
Run into a problem. I have this Toshiba CX28519 CTV, had a Vertical
problem.
Changed AN5521 with all caps in the stage. Problem still persits. Anybody
with any tricks Please
Thanx
 
have you Check de resistor and diode from the flyback ?.


On Wed, 10 Dec 2003 10:47:48 -0400, "fixer"
<electroshack@hfx.eastlink.ca> wrote:

Run into a problem. I have this Toshiba CX28519 CTV, had a Vertical problem.
Changed AN5521 with all caps in the stage. Problem still persits. Anybody
with any tricks Please
Thanx
 

Welcome to EDABoard.com

Sponsor

Back
Top