help with jaycar interior light delay kit.

M

Method

Guest
Has anyone ever built and installed this kit?
I purchased this a few days ago to put into my car 'nissan 300zx' and can't
seem to work out what it is trying to explain by the LIGHTS wire?

It says to find the wiring harness and find if its a 0v or 12v switch or
something so you know what pcb to build. How are you supposed to know or
find out what sort of switch it is? I don't really want to put holes in
every wire in my wiring harness.

It then says connect the 12v+ GND and OUTPUT. Looking at the pcb layouts
there only seems to be wires for 12v+ GND and LIGHTS. It says not to connect
the LIGHTS. What is the LIGHTS?

Where does the OUTPUT connect to ?

Sorry i am not the brightest at understanding these instructions but when
you have a wiring harness with many many many wires it's not hard to get
confused.

Thanks for your help.
 
"Method" <pmitsaki@bigpond.net.au> wrote in message
news:C8_qb.1721$aT.715@news-server.bigpond.net.au...
Has anyone ever built and installed this kit?
I purchased this a few days ago to put into my car 'nissan 300zx' and
can't
seem to work out what it is trying to explain by the LIGHTS wire?

It says to find the wiring harness and find if its a 0v or 12v switch or
something so you know what pcb to build. How are you supposed to know or
find out what sort of switch it is? I don't really want to put holes in
every wire in my wiring harness.

It then says connect the 12v+ GND and OUTPUT. Looking at the pcb layouts
there only seems to be wires for 12v+ GND and LIGHTS. It says not to
connect
the LIGHTS. What is the LIGHTS?

Where does the OUTPUT connect to ?

Sorry i am not the brightest at understanding these instructions but when
you have a wiring harness with many many many wires it's not hard to get
confused.

Thanks for your help.


The Ov and 12v switch bit refers to wether the door switch completes the
Click to expand...
light circuit to ground or supplies 12v for the lamps. AFAIK the Ov is the
most common.
These delay kits usually just go between the wire coming down from the cab
lights etc and the door switch.

--
Regards ............... Rheilly Phoull
 
Can you scan the Schematic diagram ?This would provide some clues

Marc


Method wrote:

Has anyone ever built and installed this kit?
I purchased this a few days ago to put into my car 'nissan 300zx' and can't
seem to work out what it is trying to explain by the LIGHTS wire?

It says to find the wiring harness and find if its a 0v or 12v switch or
something so you know what pcb to build. How are you supposed to know or
find out what sort of switch it is? I don't really want to put holes in
every wire in my wiring harness.

It then says connect the 12v+ GND and OUTPUT. Looking at the pcb layouts
there only seems to be wires for 12v+ GND and LIGHTS. It says not to connect
the LIGHTS. What is the LIGHTS?

Where does the OUTPUT connect to ?

Sorry i am not the brightest at understanding these instructions but when
you have a wiring harness with many many many wires it's not hard to get
confused.

Thanks for your help.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top