Help on DPDT wiring

K

ketab

Guest
Hi,
I have a DPDT toggle switch, and I like to give two inputs to it
(AC and DC) .
by toggling the switch to AC I like to get AC out put, and toggling to
DC I like to get DC out put.( one at a time).
what would be the wiring look line?
thanks for the help.
 
It would help to know what kind of load you're switching and what kind
of voltage you're talking about.
 
On Sat, 30 Jul 2005 23:51:11 -0400, "ketab" <ketaber@rogers.com>
wrote:

Hi,
I have a DPDT toggle switch, and I like to give two inputs to it
(AC and DC) .
by toggling the switch to AC I like to get AC out put, and toggling to
DC I like to get DC out put.( one at a time).
what would be the wiring look line?
thanks for the help.
Looking at the back of a common DPDT toggle switch (no guarantee yours
is the same!) there should be six terminals:

1 2
3 4
5 6

3 connects to either 1 or 5, depending on the switch position.
Likewise 4 connects to either 2 or 6. 1, 3, or 5 never connect to 2,
4, or 6. Verify with an ohmmeter.

Connect the two AC wires to 1 and 2.
Connect the + and - DC wires to 5 and 6
Connect the load to 3 and 4.


Steve Noll | The Used Equipment Dealer Directory:
| http://www.big-list.com
| Peltier Information Directory:
| http://www.peltier-info.com
 
On 7/30/05 8:55 PM, in article
1122782157.799044.274490@z14g2000cwz.googlegroups.com, "spudnuty"
<spudnuty@lycos.com> wrote:

It would help to know what kind of load you're switching and what kind
of voltage you're talking about.
And it would help if you would quote the post to which you are commenting.
 
ketab wrote:
Hi,
I have a DPDT toggle switch, and I like to give two inputs to it
(AC and DC) .
by toggling the switch to AC I like to get AC out put, and toggling to
DC I like to get DC out put.( one at a time).
what would be the wiring look line?
thanks for the help.



+--------->Out
|
---------|---------
AC in----|--0 0 0--|----DC in
| |
AC in----|--0 0 0--|----DC in
---------|---------
|
+--------->Out

Ed
 

Welcome to EDABoard.com

Sponsor

Back
Top