help in node finding

[surena]

Hi,

I use Orcad (capture 9.2). Sometimes I find the error messages like

ERROR -- Less than 2 connections at node N00193

How I can find these nodes on the schematic? I try to debug, but where
is the node?

Surena

 

[Jim Thompson]

On 24 Nov 2005 08:27:27 -0800, "surena" <surena_abari@yahoo.com>
wrote:

Hi,

I use Orcad (capture 9.2). Sometimes I find the error messages like

ERROR -- Less than 2 connections at node N00193

How I can find these nodes on the schematic? I try to debug, but where
is the node?

Surena

In Probe, View, Output File, search for "N00193"

I don't use Capture, but I would expect that you can View, Netlist
from there also.

You can also prename nodes... double-click (in Schematics, you may
need to experiment in Capture, gag-me-with-a-spoon on a wire and
Label it.

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.

 

[Boris Mohar]

On 24 Nov 2005 08:27:27 -0800, "surena" <surena_abari@yahoo.com> wrote:

Hi,

I use Orcad (capture 9.2). Sometimes I find the error messages like

ERROR -- Less than 2 connections at node N00193

How I can find these nodes on the schematic? I try to debug, but where
is the node?

Surena

CTRL F
Nets
N00193

It should light up



Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs (among other things) http://www.viatrack.ca

void _-void-_ in the obvious place

 

[surena]

Hi,

I found the net. I have used a transistor (Q1: 2N2222) in my schematic
page and connected wire to it. But apparently capture does not
recognize it or ignore it. It gives the error:
WARNING [NET0093] No PSpiceTemplate for Q1, ignoring
How it can be possible? I used it from the transistor library and
connected wire to it correctly.

Surena.

 

[Robert Baer]

surena wrote:

Hi,

I found the net. I have used a transistor (Q1: 2N2222) in my schematic
page and connected wire to it. But apparently capture does not
recognize it or ignore it. It gives the error:
WARNING [NET0093] No PSpiceTemplate for Q1, ignoring
How it can be possible? I used it from the transistor library and
connected wire to it correctly.

Surena.

Maybe the item in the library is incomplete, and one or more of its

pins/nodes is un-numbered.
I had a similar problem with completely different software, so it was
worth mentioning.

 

[Helmut Sennewald]

"surena" <surena_abari@yahoo.com> schrieb im Newsbeitrag
news:1132858447.757065.78450@g14g2000cwa.googlegroups.com...

Hi,

I found the net. I have used a transistor (Q1: 2N2222) in my schematic
page and connected wire to it. But apparently capture does not
recognize it or ignore it. It gives the error:
WARNING [NET0093] No PSpiceTemplate for Q1, ignoring
How it can be possible? I used it from the transistor library and
connected wire to it correctly.

Surena.

Hello Surena,

You have to take the components only from the libraries below
the path "PSPICE". The parts from other libraries don't have the
correct settings for simulation.

Best regards,
Helmut