help ID this LCD Tv!

B

b

Guest
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU so
I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkh
http://www.mediafire.com/?qnnb96eqf8oyfpn
http://www.mediafire.com/?bo4euo5dbm9ika1
http://www.mediafire.com/?py62n3kngj1we1d
http://www.mediafire.com/?x977hv9i3xzy06g

the screen/display is a Sharp LQ150X1, seems quite common. Not so sure
about the signal pcb and inverter though.Perhaps some kind soul could
ID it and let me know what voltage and polarity (if DC) are needed.
cheers,
B
 
On Nov 6, 2:37 pm, b <reverend_rog...@yahoo.com> wrote:
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU so
I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkhhttp://www.mediafire.com/?qnnb96eqf8oyfpnhttp://www.mediafire.com/?bo4euo5dbm9ika1http://www.mediafire.com/?py62n3kngj1we1dhttp://www.mediafire.com/?x977hv9i3xzy06g

the screen/display is a Sharp LQ150X1, seems quite common. Not so sure
about the signal pcb and inverter though.Perhaps some kind soul could
ID it and let me know what voltage and polarity (if DC) are needed.
cheers,
B
Click to expand...
update, a bit of continuity testing gave me the polatity of the plug,
so I hit it with 12v and it worked.
Would still like to know the maker though so I can programme a
universal remote.
-B
 
On Sat, 06 Nov 2010 11:01:55 -0700, b wrote:

On Nov 6, 2:37 pm, b <reverend_rog...@yahoo.com> wrote:
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU so
I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkhhttp://www.mediafire.com/?
qnnb96eqf8oyfpnhttp://www.mediafire.com/?bo4euo5dbm9ika1http://
Click to expand...
www.mediafire.com/?py62n3kngj1we1dhttp://www.mediafire.com/?
x977hv9i3xzy06g
the screen/display is a Sharp LQ150X1, seems quite common. Not so sure
about the signal pcb and inverter though.Perhaps some kind soul could
ID it and let me know what voltage and polarity (if DC) are needed.
cheers,
B

update, a bit of continuity testing gave me the polatity of the plug, so
I hit it with 12v and it worked.
Would still like to know the maker though so I can programme a universal
remote.
-B
Click to expand...

Most universals have a mode where you can click through every code known
to the universal. When you click through them and finally the TV comes on
you hit the jackpot. I had to do this once with a TV that was not listed
in the code book but did follow the codes of another brand.


--
Live Fast, Die Young and Leave a Pretty Corpse
 
On Nov 6, 1:13 pm, Meat Plow <mhyw...@yahoo.com> wrote:
On Sat, 06 Nov 2010 11:01:55 -0700, b wrote:
On Nov 6, 2:37 pm, b <reverend_rog...@yahoo.com> wrote:
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU so
I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkhhttp://www.mediafire.com/?

qnnb96eqf8oyfpnhttp://www.mediafire.com/?bo4euo5dbm9ika1http://www.mediafire.com/?py62n3kngj1we1dhttp://www.mediafire.com/?
x977hv9i3xzy06g



the screen/display is a Sharp LQ150X1, seems quite common. Not so sure
about the signal pcb and inverter though.Perhaps some kind soul could
ID it and let me know what voltage and polarity (if DC) are needed.
cheers,
B

update, a bit of continuity testing gave me the polatity of the plug, so
I hit it with 12v and it worked.
Would still like to know the maker though so I can programme a universal
remote.
-B

Most universals have a mode where you can click through every code known
to the universal. When you click through them and finally the TV comes on
you hit the jackpot. I had to do this once with a TV that was not listed
in the code book but did follow the codes of another brand.

--
Live Fast, Die Young and Leave a Pretty Corpse
Click to expand...
Most are: hold "Code Search" stays lit, press TV (blinks), press
"power" until it turns-off (may be 200X), press the "Enter" key.
Good idea to find the "Brand" though! If Funai it might be Silvania,
Sansui, or Emerson. (not sure about anymore)
 
On Sat, 6 Nov 2010 18:13:28 +0000 (UTC), Meat Plow <mhywatt@yahoo.com>
wrote:

On Sat, 06 Nov 2010 11:01:55 -0700, b wrote:

On Nov 6, 2:37 pm, b <reverend_rog...@yahoo.com> wrote:
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU so
I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkhhttp://www.mediafire.com/?
qnnb96eqf8oyfpnhttp://www.mediafire.com/?bo4euo5dbm9ika1http://
www.mediafire.com/?py62n3kngj1we1dhttp://www.mediafire.com/?
x977hv9i3xzy06g

the screen/display is a Sharp LQ150X1, seems quite common. Not so sure
about the signal pcb and inverter though.Perhaps some kind soul could
ID it and let me know what voltage and polarity (if DC) are needed.
cheers,
B

update, a bit of continuity testing gave me the polatity of the plug, so
I hit it with 12v and it worked.
Would still like to know the maker though so I can programme a universal
remote.
-B


Most universals have a mode where you can click through every code known
to the universal. When you click through them and finally the TV comes on
you hit the jackpot. I had to do this once with a TV that was not listed
in the code book but did follow the codes of another brand.
Click to expand...
Of course if you buy the old ones, like I do, they may not even have
the codes for newer devices.

If I bought a brand new one, would it have codes for digital-to-analog
set-top boxes?
 
mm wrote:
Meat Plow wrote:

?Most universals have a mode where you can click through every code known
?to the universal. When you click through them and finally the TV comes on
?you hit the jackpot. I had to do this once with a TV that was not listed
?in the code book but did follow the codes of another brand.

Of course if you buy the old ones, like I do, they may not even have
the codes for newer devices.

If I bought a brand new one, would it have codes for digital-to-analog
set-top boxes?
Click to expand...

I haven't seen any that do, so far.


--
Politicians should only get paid if the budget is balanced, and there is
enough left over to pay them.
 
On Sat, 06 Nov 2010 20:22:40 -0400, mm wrote:

On Sat, 6 Nov 2010 18:13:28 +0000 (UTC), Meat Plow <mhywatt@yahoo.com
wrote:

On Sat, 06 Nov 2010 11:01:55 -0700, b wrote:

On Nov 6, 2:37 pm, b <reverend_rog...@yahoo.com> wrote:
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU
so I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkhhttp://www.mediafire.com/?
qnnb96eqf8oyfpnhttp://www.mediafire.com/?bo4euo5dbm9ika1http://
www.mediafire.com/?py62n3kngj1we1dhttp://www.mediafire.com/?
x977hv9i3xzy06g

the screen/display is a Sharp LQ150X1, seems quite common. Not so
sure about the signal pcb and inverter though.Perhaps some kind soul
could ID it and let me know what voltage and polarity (if DC) are
needed. cheers,
B

update, a bit of continuity testing gave me the polatity of the plug,
so I hit it with 12v and it worked.
Would still like to know the maker though so I can programme a
universal remote.
-B


Most universals have a mode where you can click through every code known
to the universal. When you click through them and finally the TV comes
on you hit the jackpot. I had to do this once with a TV that was not
listed in the code book but did follow the codes of another brand.

Of course if you buy the old ones, like I do, they may not even have the
codes for newer devices.

If I bought a brand new one, would it have codes for digital-to-analog
set-top boxes?
Click to expand...

The last multi-function remote I took possession of was the one that came
with my Cisco 8640 HDVC DVR. It does in fact have codes for AtoD
converters. I'm 99.9% certain the newer multi-function remotes especially
those that are not your $5.00 Walmart special but something in the $30
dollar and up bracket would yield the results you desire.


--
Live Fast, Die Young and Leave a Pretty Corpse
 
On Sun, 7 Nov 2010 16:05:09 +0000 (UTC), Meat Plow <mhywatt@yahoo.com>
wrote:

On Sat, 06 Nov 2010 20:22:40 -0400, mm wrote:

On Sat, 6 Nov 2010 18:13:28 +0000 (UTC), Meat Plow <mhywatt@yahoo.com
wrote:

On Sat, 06 Nov 2010 11:01:55 -0700, b wrote:

On Nov 6, 2:37 pm, b <reverend_rog...@yahoo.com> wrote:
A neighbour brought me this TV to have a look at. No name badge, and
the label at the back just has safety warnings. He has lost the PSU
so I opened it up. Here are the pics:

http://www.mediafire.com/?3wawxq7ymwnqvkhhttp://www.mediafire.com/?
qnnb96eqf8oyfpnhttp://www.mediafire.com/?bo4euo5dbm9ika1http://
www.mediafire.com/?py62n3kngj1we1dhttp://www.mediafire.com/?
x977hv9i3xzy06g

the screen/display is a Sharp LQ150X1, seems quite common. Not so
sure about the signal pcb and inverter though.Perhaps some kind soul
could ID it and let me know what voltage and polarity (if DC) are
needed. cheers,
B

update, a bit of continuity testing gave me the polatity of the plug,
so I hit it with 12v and it worked.
Would still like to know the maker though so I can programme a
universal remote.
-B


Most universals have a mode where you can click through every code known
to the universal. When you click through them and finally the TV comes
on you hit the jackpot. I had to do this once with a TV that was not
listed in the code book but did follow the codes of another brand.

Of course if you buy the old ones, like I do, they may not even have the
codes for newer devices.

If I bought a brand new one, would it have codes for digital-to-analog
set-top boxes?


The last multi-function remote I took possession of was the one that came
with my Cisco 8640 HDVC DVR. It does in fact have codes for AtoD
converters. I'm 99.9% certain the newer multi-function remotes especially
those that are not your $5.00 Walmart special but something in the $30
dollar and up bracket would yield the results you desire.
Click to expand...
Thanks. I"ll keep my eyes open. The original remotes still work and I
haven't lost them yet, but it's good to know.

Thanks, Michael, also.

Actually and interestingly, my 80 dollar DISH TV AtoD converter, the
most expensive I came across, hasn't worked well from the start. The
Green power light on the box goes on without my doing anything, but
the box isn't working after all. And I can't turn it "off" with the
remote control, and there are no buttons on the box itself. I can
unplug it, but when I plug it back in, the green light is on, but
after 10 or 15 seconds it goes off. I'm used to this now, but still.

There are no garage door openers around here, or remotes shining in my
window. Only once every month or so, and I guess it's less often now.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top