G
Gary
Guest
Hello
does anyone know if such a device exists, i have a very old monolithic 6 pin
dil package that is no longer available, i have tried making up the same
thing with 4 2sk30a fets and though it works to some extent the output i
cannot balance to "0" volts between the two sources, i presume this to be
because the fets are not matched.
I can supply a schematic of the original one if this helps.
These are the specs
GE Intersil Monolithic dual Cascaded N channel JFET
Gary
does anyone know if such a device exists, i have a very old monolithic 6 pin
dil package that is no longer available, i have tried making up the same
thing with 4 2sk30a fets and though it works to some extent the output i
cannot balance to "0" volts between the two sources, i presume this to be
because the fets are not matched.
I can supply a schematic of the original one if this helps.
These are the specs
GE Intersil Monolithic dual Cascaded N channel JFET
ThanksCMRR >120dB
Gate Operating Current: -5pA (VDG35V ID 200ľA TA 125°C)
Drain-Source & Drain-Gate Voltages: 60V
Drain Current: 50mA per transistor
Gate to Gate Voltage: ą60V
Gate to Source Cut-off Voltage(min/max): -0.7/-4V (VDS 20V ID 1nA)
gfs 1kHz(min/max): 1000/4000ľS (VDS20V VGS0V)
gfs 1kHz(min/max): 500/1600ľS (VDS20V ID200ľA)
en 10Hz/1kHz: 50/15 ľV/?Hz
Gary