help: capture generates netlist to allegro

[Newer]

Thanks for your attention first!
I have made DRC about my shematics and the result is OK except some
warnings, I do know these warnings don't matter. But , when I creat
the allegro netlist, it will be always report erros like the
following:
--------------------------------------------------------------------------------********************************************************************************
*
* Netlisting the design
*
********************************************************************************
Design Name:
D:\CADENCE\WORKSPACE\Orcad_SGWH\sgw_h.dsn
Netlist Directory:
D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO
Configuration File:
D:\Cadence\PSD_15.0\tools\capture\allegro.cfg

Spawning... "D:\Cadence\PSD_15.0\tools\capture\pstswp.exe" -pst -d
"D:\CADENCE\WORKSPACE\Orcad_SGWH\sgw_h.dsn" -n
"D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO" -c
"D:\Cadence\PSD_15.0\tools\capture\allegro.cfg" -v 3 -j "PCB
Footprint"
#1 Warning [ALG0016] Part Name "CONN JACK PWR_TH3PIN_CONN JACK PWR" is
renamed to "CONN JACK PWR_TH3PIN_CONN JACK".
#2 Warning [ALG0016] Part Name "LM2576T3P3_TO220PINS5_LM2576T3P3" is
renamed to "LM2576T3P3_TO220PINS5_LM2576T3P".
#3 Warning [ALG0016] Part Name
"MT48LC16M16A2_TSOPII54PIN_MT48LC16M16A2" is renamed to
"MT48LC16M16A2_TSOPII54PIN_MT48L".
Scanning netlist files ...
Loading... D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO/pstchip.dat
Loading... D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO/pstchip.dat
Loading... D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO/pstxprt.dat
Loading... D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO/pstxnet.dat
Error: Line 273 in file
D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO/pstxnet.dat:
Reference designators inconsistent in xprt and xnet files
Detected in function: pstFindInstByOldPathName
Error: Line 273 in file
D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO/pstxnet.dat:
Error loading the net list file
Detected in function: ddbLoadPstXFiles
#4 Error [ALG0036] Unable to rea
d logical netlist data.

Exiting... "D:\Cadence\PSD_15.0\tools\capture\pstswp.exe" -pst -d
"D:\CADENCE\WORKSPACE\Orcad_SGWH\sgw_h.dsn" -n
"D:\CADENCE\WORKSPACE\ORCAD_SGWH\ALLEGRO" -c
"D:\Cadence\PSD_15.0\tools\capture\allegro.cfg" -v 3 -j "PCB
Footprint"


*** Done ***
--------------------------------------------------------------------------------
I don't know the reason, I have heard this may be the cadence's bug ,
but how to solve this problem? Some one has said "out it and recopy it
on" , but I want to find a more efficient way because capture only
reports one error like above every time.
SO, please help me . Any effort from you will be grateful.

Best regards.