heh

Guest
Kenmore High Efficiency front loading washer 5 months old turns itself
on.

Been hearing a jingling noise from the basement but only after the
furnace had been heating for a couple minutes.

Went down and changed the furnace air filter, oiled the combustion
motor, reseated the spade connectors to the module. Turned the
thermostat to make heat and after a few minutes of blowing air the
washer came on! Turns out the momentary on switch had been wedged
ever so slightly the last time I turned it on so it didn't release
completely. When the furnace is on it blows down close to the washer
heating the control panel just enough to make the on/off switch make
contact. The washer plays a melodic jingle when it's turned on and
when it is done. :)
 
Meat Plow wrote:
Kenmore High Efficiency front loading washer 5 months old turns itself
on.
Cool! Now if you can just get it to *load* itself... ;-)

(You might, then, want to see what you can coax the *iron*
into doing on its own!)
 

Welcome to EDABoard.com

Sponsor

Back
Top