Harma 6L6GCSTR valve problem

N

N_Cook

Guest
So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in place
ok, so will not fall out. Measuring the pin diameters about 2.15 mm compared
to a random selection of others laying around of 2.3mm. Known problem ? or
leave alone or squash the pins a bit , perpendicular to the base forks gap ?
and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt so
possibility of intermittant valve action feeding spikes back into the
preamp ? no abnormal use admitted to , to have occassioned the IC failure
 
"Nutcase Kook"


These are from Peavey Deuce with final IC before the valves is corrupt so
possibility of intermittant valve action feeding spikes back into the
preamp ?
Click to expand...

** WTF are you an about ???

The Peavey Deuce VT has a pair of transistors driving the output valves -
from a 300 volt DC supply.

Wot a bloody lunatic.



..... Phil
 
N_Cook wrote:

So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in place
ok, so will not fall out. Measuring the pin diameters about 2.15 mm compared
to a random selection of others laying around of 2.3mm. Known problem ? or
leave alone or squash the pins a bit , perpendicular to the base forks gap ?
and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt so
possibility of intermittant valve action feeding spikes back into the
preamp ? no abnormal use admitted to , to have occassioned the IC failure
Click to expand...
I don't see any IC's there? I do see a pair of transistors that may be
suffering.

Report back when you can determine the type of damage the transistors
are getting, which one, and how was it damaged? collector short, base to
emitter short? no gain? etc,,,,

Jamie
 
Jamie <jamie_ka1lpa_not_valid_after_ka1lpa_@charter.net> wrote in message
news:%84cq.20868$oz6.16864@newsfe11.iad...
N_Cook wrote:

So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in
place
ok, so will not fall out. Measuring the pin diameters about 2.15 mm
compared
to a random selection of others laying around of 2.3mm. Known problem ?
or
leave alone or squash the pins a bit , perpendicular to the base forks
gap ?
and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt
so
possibility of intermittant valve action feeding spikes back into the
preamp ? no abnormal use admitted to , to have occassioned the IC
failure



I don't see any IC's there? I do see a pair of transistors that may be
suffering.

Report back when you can determine the type of damage the transistors
are getting, which one, and how was it damaged? collector short, base to
emitter short? no gain? etc,,,,

Jamie
Click to expand...

The 300V transistor pair are ok , as is the clean channel prea.
 
--
--
N_Cook <diverse@tcp.co.uk> wrote in message
news:j4qb7g$e19$1@dont-email.me...
So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in
place
ok, so will not fall out. Measuring the pin diameters about 2.15 mm
compared
to a random selection of others laying around of 2.3mm. Known problem ?
or
leave alone or squash the pins a bit , perpendicular to the base forks gap
?
and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt so
possibility of intermittant valve action feeding spikes back into the
preamp ? no abnormal use admitted to , to have occassioned the IC failure
Click to expand...
Marking a line outside of the socket base perpendicular to a fork,
transfering a line to the valve base to get the correct "reversed"
orientation . Then a 1.9mm rod as a stop in the jaws of parallel action
pliers deformed the pins to elliptical axes of 2 and 2.3mm in the right
sense to increase the grip.
 
On Wed, 14 Sep 2011 14:46:39 +0100, N_Cook wrote:

So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in
place ok, so will not fall out. Measuring the pin diameters about 2.15
mm compared to a random selection of others laying around of 2.3mm.
Known problem ? or leave alone or squash the pins a bit , perpendicular
to the base forks gap ? and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt
so possibility of intermittant valve action feeding spikes back into
the preamp ? no abnormal use admitted to , to have occassioned the IC
failure
Click to expand...
Never had problems with Peavey sockets even on a VX VTR series that blew
one of the drivers. Replace with a pair of MJE13003 and the rest is
history.



--
Live Fast Die Young, Leave A Pretty Corpse
 
Meat Plow <mhywattt@yahoo.com> wrote in message
news:50qq32.j1h.19.2@news.alt.net...
On Wed, 14 Sep 2011 14:46:39 +0100, N_Cook wrote:

So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in
place ok, so will not fall out. Measuring the pin diameters about 2.15
mm compared to a random selection of others laying around of 2.3mm.
Known problem ? or leave alone or squash the pins a bit , perpendicular
to the base forks gap ? and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt
so possibility of intermittant valve action feeding spikes back into
the preamp ? no abnormal use admitted to , to have occassioned the IC
failure

Never had problems with Peavey sockets even on a VX VTR series that blew
one of the drivers. Replace with a pair of MJE13003 and the rest is
history.



--
Live Fast Die Young, Leave A Pretty Corpse
Click to expand...

Not a socket problem but out of mechanical spec valve problem
 
Meat Plow wrote in <news:50qq32.j1h.19.2@news.alt.net>:

On Wed, 14 Sep 2011 14:46:39 +0100, N_Cook wrote:

So called Superior Grade Cryo
Work ok and test ok but in use and the tester there is low
insertion/extraction force in the sockets. Dragon's teeth hold them in
place ok, so will not fall out. Measuring the pin diameters about 2.15
mm compared to a random selection of others laying around of 2.3mm.
Known problem ? or leave alone or squash the pins a bit , perpendicular
to the base forks gap ? and colateral damage ?
These are from Peavey Deuce with final IC before the valves is corrupt
so possibility of intermittant valve action feeding spikes back into
the preamp ? no abnormal use admitted to , to have occassioned the IC
failure

Never had problems with Peavey sockets even on a VX VTR series that blew
one of the drivers. Replace with a pair of MJE13003 and the rest is
history.
Click to expand...
Message-ID: <50lnlb.at9.17.14@news.alt.net>
Date: 13 Sep 2011
"I may take a little time off not only to enjoy the last days of
summer but to also insure a case that holds Emmett liable for the rest
of his natural life.".

14 Sep 2011 - Message-ID: <50o1tm.6se.19.1@news.alt.net>
15 Sep 2011 - Message-ID: <50qpgk.j1h.19.1@news.alt.net>
15 Sep 2011 - Message-ID: <50qq32.j1h.19.2@news.alt.net>

Just can't keep yer lies straight, can you, kook?

--
Live Fat Die Broke, Leave A Pustulent Corpse
Click to expand...
Fixed yer .sig, Wifekiller Willy.

Yer welcome.


--

___ ___ ___
/\ \ /\__\ /\ \
/::\ \ ___ /:/ _/_ \:\ \
/:/\:\ \ ___ /\__\ /:/ /\__\ \:\ \
/:/ /::\ \ /\ \ /:/__/ /:/ /:/ _/_ _____\:\ \
/:/_/:/\:\__\\:\ \ ___ /::\ \ /:/_/:/ /\__\ /::::::::\__\
\:\/:/ \/__/ \:\ \ /\__\ \/\:\ \__ \:\/:/ /:/ / \:\~~\~~\/__/
\::/__/ \:\ /:/ / ~~\:\/\__\ \::/_/:/ / \:\ \
\:\ \ \:\/:/ / \::/ / \:\/:/ / \:\ \
\:\__\ \::/ / /:/ / \::/ / \:\__\
\/__/ \/__/ \/__/ \/__/ \/__/


WHO IS 'MEAT PLOW' from Alt.Usenet.Kooks (AUK)?

The obese, abusive, ugly, snaggle-toothed, giant-headed, stalking, gay
'bear' biker retard who likes to surf gay porn sites as 'BlancoBear'
while wearing only assless chaps:

William Malone Griffith, Jr.
(aka Milt, Meat Plow, BlancoBear, Meat@petitmorte.net, Tripp)
308 10th Street NE
North Canton, OH 44720-2023

Some of this sick fuck's best work, and comments from others about
him:
http://groups.google.com/group/alt.buzzard.rules/msg/f630759d6303a19d
Message-ID: <SFexc.17128428$Of.2846155@news.easynews.com>

Meat Plow on a stalking holiday excursion, 15 to 22 Aug 2011:
--------------------
http://groups.google.com/group/alt.usenet.kooks/msg/03314ab006d88a5f
Message-ID: <4thf24.t7m.17.1@news.alt.net>
Date 06 Aug 2011
Title: Guess who is going to be in West Palm Beach?
"ME! Got a couple friends who invited me down for a few days. Shit
that's only 60 miles south of Melbourne LMAO!"

Never mind that West Palm Beach, FL is 110 miles (not 60 miles) from
Melbourne, FL.

http://groups.google.com/group/alt.usenet.kooks/msg/c1438fbeda11457f
Message-ID: <4thnmr.t7m.17.5@news.alt.net>
Date 06 Aug 2011
Title: Guess who is going to be in West Palm Beach?
"Got my itinerary set on Expidia. Will be at PBI on August the 15th
at 11:30 am. Got a nice 2011 Jeep Grand Cherokee reserved. I'm hoping
to make it up to Melbourne (Albatross hit my email) before the 20th
when I have to return."

http://groups.google.com/group/alt.usenet.kooks/msg/43855b424693fa60
Message-ID:
<349880291335311102.312349mhywattt-yahoo.com@news.altopia.com>
Date 17 Aug 2011
Title: MEAT-PLOW LIED AGAIN! (and gets smacked down YET AGAIN!)
"I have several videos and pictures of him riding and what I'm sure
pie the location of his tent."

http://groups.google.com/group/alt.usenet.kooks/msg/19e83b3eb6233fe2
Message-ID: <4uovsb.19t.17.3@news.alt.net>
Date 21 Aug 2011
Title: Emmy takes the day off.
"Well I leave tomorrow at around 7:am. Got some nice video and still
pix of the little shitty pants. There will be another Youtube video
soon"

http://groups.google.com/group/alt.usenet.kooks/msg/4b455459fe093ee3
Message-ID: <4ur8iv.hlt.19.1@news.alt.net>
Date 22 Aug 2011
Title: Ahhhh good to be home
"Had a very interesting time in Melbourne."

Hmmm... only one and a half days 'visiting friends in West Palm Beach'
(if he was ever there to begin with), and the rest of his time in
Florida spent real-life stalking. He even extended his stay by two
days, so he could get in more stalking.
--------------------

Evidence that Meat Plow is William Malone Griffith, II:
--------------------
http://groups.google.com/group/alt.usenet.kooks/msg/5650f8e1e7dedefa
Message-ID: <fc5167ee7ad8e6f64bbe528026c00d98@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/e52ffbb346f5b764
Message-ID: <ac995ab01f76a177f4012486eb671c0e@rip.ax.lt>

http://groups.google.com/group/alt.usenet.kooks/msg/a94a2a11df601e39
Message-ID: <f6ccd46e74bff6e99d49781388db38c7@rip.ax.lt>

http://groups.google.com/group/sci.electronics.repair/msg/ef80aad2e7db945d
Message-ID: <2abe74de52d65b6046cc0bdd3c108d86@rip.ax.lt>
--------------------

Meat Plow personal info:
--------------------
Birthdate: Oct 3, 1955

Amateur Radio callsign N8NCX
Technician Plus
(2 meter, 6 meter)
--------------------

--------------------
Photo of MeatPlow in Belden Village Music store (his sister's music
store):
(Note the guitars in the background, the planet-sized head,
the rotten-Chiclet teeth, and general look of retardation)
http://www.productwiki.com/william-malone-griffith-ii/lists/
http://images.productwiki.com/upload/images/william_malone_griffith_ii_avatar_1_0-150-150.jpg

Photo of William Malone Griffith, Jr. from uffnet.com:
(Note that it's the same person as in the photo above)
http://www.uffnet.com/library/headlines/images/news1376621745xlb.jpg

He's got his father's nose and eyes:
http://www.legacy.com/guestbook/kentucky/guestbook.aspx?pid=2527782
http://mi-cache.legacy.com/usercontent/guestbook/photos/2005-09/6966764.jpg
--------------------

Meat Plow email addresses:
--------------------
http://web.archive.org/web/20010305113423/http://www.k1hk.org/ugb_archive3.html
"Bill N8NCX wgriffit@neo.rr.com"

wgriffit at neo.rr.com (neo = North East Ohio)
mhywattt at yahoo.com
mhywatt at yahoo.com
--------------------

Meat Plow's brushes with the law:
--------------------
1}
https://www.starkcountycjis.org/crim/cjis_crim_traf_search?search_flag=case&pass_case_year=2002&pass_case_type=VBD&pass_case_no=11543
2002-VBD-11543 WILLIAM M GRIFFITH 308 10TH ST NE NORTH CANTON OH
44720

2}
https://www.starkcountycjis.org/civil/cjis_civil_search_modified?l_start=1&c_l_radio=c&case_year=2009&case_no=03533
2009-CVF-3533 FIA CARD SERVICES NA vs GRIFFITH II, WILLIAM M
--------------------

Meat Plow quotes:
--------------------
Meat Plow, explaining that his computer has no Master Boot Record
because he runs Mandriva 2010, not Windows:
Message-ID: <4v39g0.au.17.9@news.alt.net>
"Wouldn't know, it's been months since I've booted a Windoze OS."

Meat Plow describes his high-powered legal team:
Message-ID: <pan.2011.05.25.00.08.32@emutt.macspoofer.lmao>
"You know i have a legal team who specializes in internet law. And I
won't hesitate to get them in on the action."

Meat Plow losing his connection to reality, insinuating that he's law
enforcement:
Message-ID: <pan.2011.07.02.00.58.38@emutt.macspoofer.lmao>
"I could be LE posing as Meat Plow. It can't be dis-proven."

Meat Plow visits a massage parlor for a Happy Ending massage.
But they refused to give him a Happy Ending his second time there.
That explains why he's gay, he's so repulsive that he can't even PAY
for HAND JOBS from women.

http://www.clreviews.com/forums/showpost.php?p=11679
"One time I got a HE, and the 2nd time I didn't. I was asked if I was
there both times and said I was. That's is why I didn't know if I said
something wrong the 2nd time which made me not get a HE."

Well, at least we know what he does with his weekends.
--------------------

Oh, William, what would yer family say if they learned yer secrets?

Mother:
..----------------------------.
Catherine & Angelo Griffith

4760 Echovalley St. NW
North Canton, OH 44720-7504
330-494-5785
'----------------------------'

Daughter:
..----------------------------.
Julia M. Griffith

308 10th Street NE
North Canton, OH 44720-2023
'----------------------------'

Sister:
..----------------------------------------.
Pamela L. & Roger R. Werling
{ son Todd E. Werling (Ft. Wayne, IN) }
{ son Chris (Kennesaw, GA) }
{ son Keith (Ft. Wayne, IN) }
{ grandson Easton }
{ grandson Zakary }
{ granddaughter Camella }

7704 Bisque Court
Fort Wayne, IN 46825-3501
260-489-6086
'----------------------------------------'

Sister:
..----------------------------------------------.
Cheryl J. & Jason 'Sparky' Humberto E. Rivera
{ daughter Christina }
{ daughter Rosalio (North Canton, OH) }
{ daughter Maria (North Canton, OH) }
{ son Len Gray (Ft. Worth, TX) }

5225 Echo Valley St. NW
North Canton, OH 44720-9702
----------------------------------------------
Belden Village Music Store
6787 Wales Ave NW
North Canton, OH 44720
beldenvillagemusic.com
330-497-9292
----------------------------------------------
Rosalio B & Maria I Rivera
444 Wales Rd. NE
Massillon, OH 44646-5875
330-833-4291
----------------------------------------------
PO Box 35093
Canton, OH 44735
'----------------------------------------------'

Sister:
..---------------------------------------.
Carol L. & Ric A. Campbell
{ son Richard }
{ son Christopher (North Canton, OH) }
{ son Brandon († 30 May 1996) }
{ daughter Erin }

6794 William Tell Ave NW
North Canton, OH 44720-6546
330-497-7980
330-499-5107
---------------------------------------
PO Box 36473
Canton, OH 44735
'---------------------------------------'

Sister:
..----------------------------------.
Christine H. & Shelton M. Vick
{ son Matthew }

3915 Harvard Ave NW
Canton, OH 44709-1538
330-493-5645
----------------------------------
Re/Max Edge Realty
North Canton / Massillon / Canton
Realtor Christine H. Vick

6929 Portage St. NW
North Canton, OH 44720-6535
330-236-5100
888-830-6509 (fax)
330-904-0883 (cell)
www.MyOhioHomeFinder.com
MyOhioHomeFinder@gmail.com
'----------------------------------'

Sister:
..----------------------------.
Angela C. & Mark Warshefski

11 SE 12th St.
Pompano Beach, FL 33060
954-785-4716
----------------------------
4760 Echovalley St. NW
North Canton, OH 44720-7504
330-942-0584
'----------------------------'

Cousin:
..-------------------------.
Eddy Dailey

Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
-------------------------
Bergholz Financial Corp.
dba SuperMart
PO Box 545
524 Garfield St.
Bergholz, OH 43908
'-------------------------'

Cousin:
..--------------------.
Donna L. Dailey

524 5th St.
Bergholz, OH 43908
740-768-2416
--------------------
Bergholz Super Mart
861 Washington St.
Bergholz, OH 43908
740-768-1018
--------------------
Bergholz, OH EMT
'--------------------'

Cousin:
..-------------------.
Bill & Joyce Leas
{ son Billy }

243 2nd St.
Bergholz, OH 43908
'-------------------'

Niece:
..---------------------------.
Rachel & Adam T. Livengood
{ son Lukas }
{ daughter Lauren }

6342 Palmer Dr. NW
Canton, OH 44718
330-497-7754
'---------------------------'

Izzatchoo, or yer dead daddy?
..--------------------------------.
William M. Griffith

between 3rd and 4th St.
between Monroe and Lincoln Ave.
Bergholz, OH 43908
740-768-2539
'--------------------------------'

What would yer landlord for 308 10th St. NE,
North Canton, OH say if they learned yer secrets?
..----------------------------.
David S. and Joan R. Shaner

2095 Waterbury Dr.
Uniontown OH 44312
330-699-4042
'----------------------------'

What would the employees at yer family's
business say if they learned yer secrets?
..-----------------------------------------.
Ohio Kentucky Oil Corporation
aka Ohio Oil & Gas Exploration (defunct)
aka Ohio Kentucky Coal Company (defunct)

5112 Portage St. NW
Canton, OH 44720-6856
(330) 494-8810
(330) 497-7980
-----------------------------------------
110 E. Lowry Lane
Lexington, KY 40503
(800) BUY 4 OIL
(800) 289-4645
(859) 223-5656
(859) 223-5946
(859) 276-0699 (fax)
(859) 276-3500
(859) 276-4080
-----------------------------------------
http://www.ohiokentuckyoil.com
oilstrike@insightbb.com
admin@ohiokentuckyoil.net
'-----------------------------------------'

----------
Oh, but wait, Ohio Oil & Gas Exploration is no longer incorporated in
Ohio:
Daddy Griffith's petrol exploration company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:7:p7_CHARTER_NUM:384125

Nor are any of the other businesses yer daddy started. You let them
all fail:
Daddy Griffith's stables (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:7:p7_CHARTER_NUM:377966

Daddy Griffith's motel business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:7:p7_CHARTER_NUM:377965

Daddy Griffith's drilling company (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:7:p7_CHARTER_NUM:347837

Daddy Griffith's metals business (defunct):
http://www2.sos.state.oh.us/pls/bsqry/f?p=100:7:3376481605987832::NO:7:p7_CHARTER_NUM:552193

And Ohio Kentucky Oil Corporation is on its last legs, inundated with
securities fraud lawsuits and EPA lawsuits. It's barred from
soliciting investors in Tennessee due to securities fraud, it's under
investigation in Ohio and Kentucky, it owns no oil assets or wells,
and it no longer does any of its own drilling. It'll be gone soon,
too.

And you've squandered everything Daddy Griffith earned from his
businesses, so yer now poor, adding insult to injury.
----------

You being poor is why you issued the following. You knew you didn't
have ten thousand dollars or so to defend yerself against yet another
lawsuit:

William Malone Griffith, II's grovelfest of an apology for being a
fucktard stauker:
==================================================
http://groups.google.com/group/alt.usenet.kooks/browse_thread/thread/8d753c94bd612f4e
http://www.freak-search.com/en/thread/3859383/meat_plow_exposed
http://groups.google.com/group/alt.usenet.kooks/msg/c9fccf0d1ab26ace
Message-ID: <3n4c2e.bi4.17.1@news.alt.net>

Title: Apology to Charles Novins

The witnesses to this abject, groveling apology:

Angela Griffith = Angela C. Griffith-Warshefski, William Malone
Griffith, Jr.'s sister

Catherine Griffith = William Malone Griffith, Jr.'s mother

Julia M. Griffith = William Malone Griffith, Jr.'s daughter

Cheri Griffith = Cheryl J. Griffith-Rivera, William Malone Griffith,
Jr.'s sister

Justin M. Griffith = ?

Kristy Griffith = Christine H. Griffith-Vick, William Malone Griffith,
Jr.'s sister
-----
Questions yet to be answered:
Who is Justin M. Griffith?

Angela C. Griffith-Warshefski came all the way from Pompano Beach,
Florida to witness and sign MeatPlow's apology letter?

Or did William Malone Griffith, Jr. forge the witness signatures,
which would indicate some level of insincerity in the apology?

If William Malone Griffith, Jr. did indeed forge the witness
signatures, is his family cognizant of him using them in this way?

Who is Deborah Ann Griffith?
-----
Who is Sherri Renee Christie, William D. Christie (age 54) and Lillie
L. Christie, and how are they associated with William Malone Griffith,
II?

1345 Bison St. NW
Massillon, OH 44647
330-833-5313 (Sherri)
330-837-4967 (William)

2524 Meadows Ave NW
Apt. 4
Massillon, OH 44647

PO Box 36221
Canton, OH 44735
-----
==================================================
It's time for a digital enema to flush this turd named William Malone
Griffith, II out of the system.

The exit is -.
|
'-----.
.---. .-----. |
| | '---. | |
'-. `-----|-' |
| '---'
'------------->
thataway
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top