Hantek

[Trevor Wilson]

A mate wants to replace his aging Tek DSO with a cheap 'n cheerful
Chinese jobbie, like this:

https://www.ebay.com.au/itm/Hantek-DSO5102P-Digital-Oscilloscope-2-Channels-100MHz-1GSa-s/264259901849?hash=item3d871e1999:g:JooAAOSwc6paDVHd

I have a Rigol DS1054z and am very pleased with it, but his budget
doesn't stretch that far. The Hantek looks decent enough and has Aussie
distribution.

Anyone have experience with the brand?

Siglent?

Etc?

--
Trevor Wilson
www.rageaudio.com.au

 

[Ralph Mowery]

In article <h6d0n9Fbh7vU1@mid.individual.net>, trevor@rageaudio.com.au
says...

mate wants to replace his aging Tek DSO with a cheap 'n cheerful
Chinese jobbie, like this:

https://www.ebay.com.au/itm/Hantek-DSO5102P-Digital-Oscilloscope-2-Channels-100MHz-1GSa-s/264259901849?hash=item3d871e1999:g:JooAAOSwc6paDVHd

I have a Rigol DS1054z and am very pleased with it, but his budget
doesn't stretch that far. The Hantek looks decent enough and has Aussie
distribution.

Anyone have experience with the brand?

I bought a Hantek a few years back. Was going to go with a Rigol, but
overheard a couple of men at a hamfest talking scopes and they said the
Hantek was a better scope. a friend bought one a year or so later. I
think the Hantek is along the same line as the Rigol.

There are some hacks on youtube to extend the frequency ranges of the
scopes. I have not tried any of them It could be the scopes need some
componet changes to make use of the extended bandwidth. I don't know.

 

[Cursitor Doom]

On Mon, 23 Dec 2019 18:45:50 -0500, Ralph Mowery
<rmowery28146@earthlink.net> wrote:

I bought a Hantek a few years back. Was going to go with a Rigol, but
overheard a couple of men at a hamfest talking scopes and they said the
Hantek was a better scope.

I think you'd best delete that comment before JL reads it.

--

"When constituencies are small their elected representatives must concern themselves with
the local interests of their constituents. When political representatives are distant and
faceless, on the other hand, and represent vast numbers of unknown constituents, they
represent not their constituents, but special interest groups whose lobbyists are numerous
and ever present. Typically in Europe a technocrat is an ex-politician or a civil servant.
He is unelected, virtually impossible to dislodge during his term of employment and has
been granted extensive executive and even legislative power without popular mandate and
without being directly answerable to the people whose interests he falsely purports to
represent."

- Sir James Goldsmith (Member of the European Parliament) 1933 - 1997

 

On Tuesday, December 24, 2019 at 5:40:05 PM UTC-8, Cursitor Doom wrote:

On Mon, 23 Dec 2019 18:45:50 -0500, Ralph Mowery
rmowery28146@earthlink.net> wrote:

I bought a Hantek a few years back. Was going to go with a Rigol, but
overheard a couple of men at a hamfest talking scopes and they said the
Hantek was a better scope.

I think you'd best delete that comment before JL reads it.

snip

I don't think JL has issues with Rigol vs whatever. I have a Rigol DS1054Z and have hacked it to turn on all the options. It reports itself as a DS1104Z (100 MHz version). The case does not need to be opened so the tamper seal is intact. It's a lot of scope for $350. Display freeze between triggers is very helpful when sorting out serial data transfers. Its decoding of the serial stream is also useful.

Merry Christmas

G²

 

[Ralph Mowery]

In article <8144d537-387f-4442-bd17-60d93080afb0@googlegroups.com>,
stratus46@yahoo.com says...

I don't think JL has issues with Rigol vs whatever. I have a Rigol DS1054Z and have hacked it to turn on all the options. It reports itself as a DS1104Z (100 MHz version). The case does not need to be opened so the tamper seal is intact. It's a lot of scope for $350. Display freeze between triggers is very helpful when sorting
out serial data transfers. Its decoding of the serial stream is also useful.

Merry Christmas

G˛

Some of the electronics comming out of China is a lot for the money.
One reason given for the Hantek was it had a larger screen. Very
helpful it you turn on the on screen measurments.

I don't know about other digital scopes as I have not used any, but my
only complaint so far is that if doing an XY display the circle and
other paterns just do not work or show up as clear as they do on the
older analog scopes.

 

[Fox's Mercantile]

On 12/25/19 4:20 PM, Ralph Mowery wrote:
> I don't know about other digital scopes as I have not used any

And then there's the gold standard of digital scopes.
The HP infinium.
I have one in my shop I acquired for next to nothing.
<https://i.ebayimg.com/images/g/R2EAAOSw6btXTP8Y/s-l1600.jpg>


--
"I am a river to my people."
Jeff-1.0
WA6FWi
http:foxsmercantile.com

 

[Ralph Mowery]

In article <mOedndHSC792ZJ7DnZ2dnUU7-e_NnZ2d@giganews.com>,
jdangus@att.net says...

And then there's the gold standard of digital scopes.
The HP infinium.
I have one in my shop I acquired for next to nothing.
https://i.ebayimg.com/images/g/R2EAAOSw6btXTP8Y/s-l1600.jpg

No argument here if one has the gold, or as in your case acquire it for
next to nothing.