gschem/pcb (geda) simm72 correct?

I have made a simm72 socket connector. Could anyone check if it's "ok" ?

http://www.ludd.luth.se/~pb/pub/simm72_geda.tar.bz2

pin alignment?
drillsizes?

 

pbdelete@spamnuke.ludd.luthdelete.se.invalid wrote:

I have made a simm72 socket connector. Could anyone check if it's "ok" ?

http://www.ludd.luth.se/~pb/pub/simm72_geda.tar.bz2

pin alignment?
drillsizes?

Which connector do you plan to use it with? Solder in, press fit?

 

fpga_toys@yahoo.com wrote:

pbdelete@spamnuke.ludd.luthdelete.se.invalid wrote:
I have made a simm72 socket connector. Could anyone check if it's "ok" ?

http://www.ludd.luth.se/~pb/pub/simm72_geda.tar.bz2

pin alignment?
drillsizes?

Which connector do you plan to use it with? Solder in, press fit?

Solder in I guess.

 

[DJ Delorie]

Just FYI, we're moving away from the "m4" format towards preferring
the new "newlib" format, which is, it's just a file with the whole
Element() in it as-is (no more m4 processing). The benefit is, you
can (1) edit and (2) view your elements with pcb itself (at least,
indirectly).