GooseNeck Material

[Jim Douglas]

I am looking for some of that for a project but don't seem to be able to
find a supplier anywhere, short of looking for PC microphones that have it
and stripping does anyone know of a source, metal/plastic/rubber ok.

Thanks!

 

[martin griffith]

On Fri, 26 Nov 2004 08:02:45 -0600, in sci.electronics.design "Jim
Douglas" <james.douglas@genesis-software.com> wrote:

I am looking for some of that for a project but don't seem to be able to
find a supplier anywhere, short of looking for PC microphones that have it
and stripping does anyone know of a source, metal/plastic/rubber ok.

Thanks!

http://www.canford.co.uk/commerce/item_53-123_3001399.aspx

martin

Serious error.
All shortcuts have disappeared.
Screen. Mind. Both are blank.

 

[Boris Mohar]

On Fri, 26 Nov 2004 08:02:45 -0600, "Jim Douglas"
<james.douglas@genesis-software.com> wrote:

I am looking for some of that for a project but don't seem to be able to
find a supplier anywhere, short of looking for PC microphones that have it
and stripping does anyone know of a source, metal/plastic/rubber ok.

Thanks!

http://www.mcmaster.com/

Enter gooseneck



Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs http://www3.sympatico.ca/borism/

 

[Joerg]

Hi Jim,

If you need something very quickly before the order from the UK arrives
check the next hardware store. In the lighting section they usually have
several goose necked desk lamps at prices that can even be below what
the goose neck alone would cost.

Once I desperately needed a telescope antenna. So I bought a little
halogen desk lamp for about $15. Took it apart and, whoopdidou, I had
two telescope antennas. Plus a transformer, a bulb and a spare power cord.

Regards, Joerg

http://www.analogconsultants.com

 

[Alan]

On Fri, 26 Nov 2004 08:02:45 -0600, "Jim Douglas"
<james.douglas@genesis-software.com> wrote:

I am looking for some of that for a project but don't seem to be able to
find a supplier anywhere, short of looking for PC microphones that have it
and stripping does anyone know of a source, metal/plastic/rubber ok.

Thanks!

You could try a decent musical instrument shop. You know the kind of

place that the musos/bands go to get their gear.

Alan

++++++++++++++++++++++++++++++++++++++++++
Jenal Communications
Manufacturers and Suppliers of HF Selcall
P O Box 1108, Morley, WA, 6943
Tel: +61 8 9370 5533 Fax +61 8 9467 6146
Web Site: http://www.jenal.com
Contact: http://www.jenal.com/?p=1
++++++++++++++++++++++++++++++++++++++++++