good autorouter

[Johan Wagener]

I need a simple easy to use program that can do the following. I will give
it the circuit diagram. It must then create and route a PC board in a single
layer. I used ciruitmaker and tracksmaker but it can't seem to route all the
nets. I need a program that will move the components as well to give the
smallest possible design.

 

[Boris Mohar]

On Fri, 5 Sep 2003 22:00:50 +0200, "Johan Wagener" <pil(nospam)@webmail.co.za>
wrote:

I need a simple easy to use program that can do the following. I will give
it the circuit diagram. It must then create and route a PC board in a single
layer. I used ciruitmaker and tracksmaker but it can't seem to route all the
nets. I need a program that will move the components as well to give the
smallest possible design.

It is called "Human"

--

Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs http://www3.sympatico.ca/borism/
Aurora, Ontario

 

[Ed]

Lol and the auto placer on any protel does really amusing things.

"Johan Wagener" <pil(nospam)@webmail.co.za> wrote in message
news:3f58eb71$0$64721@hades.is.co.za...

I need a simple easy to use program that can do the following. I will give
it the circuit diagram. It must then create and route a PC board in a
single
layer. I used ciruitmaker and tracksmaker but it can't seem to route all
the
nets. I need a program that will move the components as well to give the
smallest possible design.

 

[Ed]

But I recon the autorouter is good, with a little fiddling.

"Ed" <svalbe@optusnet.com.au> wrote in message
news:3f5f1efd$0$10356$afc38c87@news.optusnet.com.au...

Lol and the auto placer on any protel does really amusing things.

"Johan Wagener" <pil(nospam)@webmail.co.za> wrote in message
news:3f58eb71$0$64721@hades.is.co.za...
I need a simple easy to use program that can do the following. I will
give
it the circuit diagram. It must then create and route a PC board in a
single
layer. I used ciruitmaker and tracksmaker but it can't seem to route all
the
nets. I need a program that will move the components as well to give the
smallest possible design.