Gibson Les Paul classic of 2013

N

N_Cook

Guest
Firstly "classic" moniker with battery and J202 FET inside?
Unless I've misread the mini-pcb tracery , the boost switch is DPDT
using 2 seriesed switch actions for increased unreliability?
I would have paralleled for increased reliability of a simple switch
action if using a DPDT perhaps because it is more mechanically robust
than SPST or SPDT, or am I missing something?
 
"N_Cook" wrote in message news:nc0ouk$m1b$1@dont-email.me...

Firstly "classic" moniker with battery and J202 FET inside?
Unless I've misread the mini-pcb tracery , the boost switch is DPDT
using 2 seriesed switch actions for increased unreliability?
I would have paralleled for increased reliability of a simple switch
action if using a DPDT perhaps because it is more mechanically robust
than SPST or SPDT, or am I missing something?





That's not the Series/Parallel switch you are looking at?


Gareth.
 
On 12/03/2016 11:39, Gareth Magennis wrote:
"N_Cook" wrote in message news:nc0ouk$m1b$1@dont-email.me...
Firstly "classic" moniker with battery and J202 FET inside?
Unless I've misread the mini-pcb tracery , the boost switch is DPDT
using 2 seriesed switch actions for increased unreliability?
I would have paralleled for increased reliability of a simple switch
action if using a DPDT perhaps because it is more mechanically robust
than SPST or SPDT, or am I missing something?





That's not the Series/Parallel switch you are looking at?


Gareth.
Click to expand...

Not my intended meaning, only 4 terminals are used of the 6 , but not in
a DPST sense as 2 of those 4 terminals are bridged across by a trace, so
the action is just a simple SPST, via 2 switch contacts. So one pole
on or off to simply switch in/out a filter cap or something
 
The pcb is multilayer , and all 6 pins of the switch are used.
Looks as though problem was a low battery that recovered and drooped
between uses, as such a light loading, 22K in line with battery to
transistor etc.
But as far as I can see, after deeper exploration, there are 2 seriesed
switch actions of 2 poled for one simple on/off one pole function.
 
I cannot find a user manual even referred to on this, or elsewhere
http://www.gibson.com/Products/Electric-Guitars/2014/Les-Paul-Classic/Specifications.aspx
2013 on the pcb overlay, model 2014?
Those "2014" specs refer to this small toggle switch as 15dB boost,
which implies the other position is a normal sort of output.
As far as I can see with this guitar , that switch is amp on in both
positions, properly on one way and full-mute audio quiet-switching in
the other position, whether the 2 pot switches are on or off. Full
on/off of the J202 is via sleeve/ring ground inter-connection of the
guitar lead jack. I'll have to get from the owner what that switch does
or did.
I hope musos find the battery cover clip as impossible as I did.
Insert fingernail under ledge but move in the opposite direction to the
ideogram arrow on the moulding of the plastic.
I wonder how long before problems with the flimsey 1.25mm spacing pickup
lead connectors to the pcb.
 
Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar. So how is an owner supposed to know that
you have to unplug the guitar lead, to switch off the battery, let alone
anything else?
 
"N_Cook" wrote in message news:ncgstc$nn4$1@dont-email.me...

Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar. So how is an owner supposed to know that
you have to unplug the guitar lead, to switch off the battery, let alone
anything else?






All active guitars have this function.
Likewise, all battery powered guitar effects pedals also have this function
via the switched input jack socket.


Most owners of such products who don't know about these functions soon find
out when the battery goes dead and they ask their mates why.



Gareth.
 
On 18/03/2016 19:37, Gareth Magennis wrote:
"N_Cook" wrote in message news:ncgstc$nn4$1@dont-email.me...

Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar. So how is an owner supposed to know that
you have to unplug the guitar lead, to switch off the battery, let alone
anything else?






All active guitars have this function.
Likewise, all battery powered guitar effects pedals also have this
function via the switched input jack socket.


Most owners of such products who don't know about these functions soon
find out when the battery goes dead and they ask their mates why.



Gareth.
Click to expand...

Are we in the 21 century?
The owner only tended to use one setting of all the 3 switches, just
changing the rotary controls, plus lead connected all the time to the
amp, so internal battery on all the time. Switching the small toggle
switch on and off assuming that turned the internal amp on and off. This
was from new and unless it fell off somewhere it looks as though Gibson
does not even put a little soft cover over the spindle of that switch,
so bare metal, unlike the normal 3 way switch which does have a soft
cover. Avoids static clicks , if nothing else, getting through to the
output.
 
"N_Cook" wrote in message news:nchmb6$3i9$1@dont-email.me...

On 18/03/2016 19:37, Gareth Magennis wrote:
"N_Cook" wrote in message news:ncgstc$nn4$1@dont-email.me...

Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar. So how is an owner supposed to know that
you have to unplug the guitar lead, to switch off the battery, let alone
anything else?






All active guitars have this function.
Likewise, all battery powered guitar effects pedals also have this
function via the switched input jack socket.


Most owners of such products who don't know about these functions soon
find out when the battery goes dead and they ask their mates why.



Gareth.
Click to expand...

Are we in the 21 century?
The owner only tended to use one setting of all the 3 switches, just
changing the rotary controls, plus lead connected all the time to the
amp, so internal battery on all the time. Switching the small toggle
switch on and off assuming that turned the internal amp on and off. This
was from new and unless it fell off somewhere it looks as though Gibson
does not even put a little soft cover over the spindle of that switch,
so bare metal, unlike the normal 3 way switch which does have a soft
cover. Avoids static clicks , if nothing else, getting through to the
output.





I should imagine that if that switch turned the power on and off, there
would be an almighty BANG which would raise far more eyebrows than a
piffling static click. :)


Gareth.
 
Gareth Magennis wrote:

"N_Cook"

Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar. So how is an owner supposed to know that
you have to unplug the guitar lead, to switch off the battery, let alone
anything else?
Click to expand...

** Err - ever see this?

http://archive.gibson.com/RobotGuitar/robot-guitar-manual.pdf


> All active guitars have this function.

** So what?

There are many who have never seen one before.

Likewise, all battery powered guitar effects pedals also have this function
via the switched input jack socket.
Click to expand...

** They all come with manuals.


Most owners of such products who don't know about these functions soon find
out when the battery goes dead and they ask their mates why.
Click to expand...

** Then there are the others who blame bad batteries or annoy technicians with nonsense stories about the pedal being faulty.

More than once I have had to ask if the owner left leads plugged in overnight.

I really like the ones who insist their battery operated pedal hums.


..... Phil
 
N_Cook wrote:
Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar.
Click to expand...

** Gibson have always supplied owners manuals:

http://www.manualslib.com/brand/gibson/guitar.html

More than 200 of 'em there.


...... Phil
 
On 18/03/2016 20:02, Gareth Magennis wrote:
"N_Cook" wrote in message news:nchmb6$3i9$1@dont-email.me...

On 18/03/2016 19:37, Gareth Magennis wrote:


"N_Cook" wrote in message news:ncgstc$nn4$1@dont-email.me...

Confirmed by the owner. I find it amazing that Gibson do not supply user
manuals with any new guitar. So how is an owner supposed to know that
you have to unplug the guitar lead, to switch off the battery, let alone
anything else?






All active guitars have this function.
Likewise, all battery powered guitar effects pedals also have this
function via the switched input jack socket.


Most owners of such products who don't know about these functions soon
find out when the battery goes dead and they ask their mates why.



Gareth.

Are we in the 21 century?
The owner only tended to use one setting of all the 3 switches, just
changing the rotary controls, plus lead connected all the time to the
amp, so internal battery on all the time. Switching the small toggle
switch on and off assuming that turned the internal amp on and off. This
was from new and unless it fell off somewhere it looks as though Gibson
does not even put a little soft cover over the spindle of that switch,
so bare metal, unlike the normal 3 way switch which does have a soft
cover. Avoids static clicks , if nothing else, getting through to the
output.





I should imagine that if that switch turned the power on and off, there
would be an almighty BANG which would raise far more eyebrows than a
piffling static click. :)


Gareth.
Click to expand...

This is very light load of 9V , one FET, and 22K in line with "B+".
With old battery 4V over the circuit and it worked, tried on
DVM-bat_test and 0.02V registered, and about 6V on DVM-V.
I would have thought a SM 10uF cap downstream of that 22K would do the
job of switch-on bang, perhaps switch-off fart would be frowned-on, but
there is already a muting subcircuit there, so perhaps 3PDT switch instead.
Had another go at trying to find a user manual for a classic 2014, specs
yes, but no user manual to explain about that toggle switch, mute/boost
or normal/boost variants
 
N_Cook wrote:
This is very light load of 9V , one FET, and 22K in line with "B+".
With old battery 4V over the circuit and it worked, tried on
DVM-bat_test and 0.02V registered, and about 6V on DVM-V.
I would have thought a SM 10uF cap downstream of that 22K would do the
job of switch-on bang, perhaps switch-off fart would be frowned-on, but
there is already a muting subcircuit there, so perhaps 3PDT switch instead.
Had another go at trying to find a user manual for a classic 2014, specs
yes, but no user manual to explain about that toggle switch, mute/boost
or normal/boost variants
Click to expand...

Don't they have music stores in your country? They show you how to
operate that type of equipment, over here.
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top