Getting wired for the U.S. and Italy!!!

Hi,

I am looking to buy an inkjet printer, DVD recorder with hard disk, and
home theater system. The problem is that I am living in Italy
(220V/50Hz) and may move to the U.S. (110V/60Hz) in the future. I
would the option to use these electronics in both countries.

I have the option of buying the products in the U.S., but would prefer
to buy them here in Italy. From a technical standpoint, is it better
to step down from 220/50 to 110/60 or step up?

I would like to avoid purchasing a voltage transformer/converter. Is
it feasible to have these products rewired by an electrician to handle
both voltages and frequencies?

I assume there is some form of a motor in all of these products. Is
this a problem as far as the frequency is concerned?

Thanks in advance for the help!

GG

 

[Kim Sleep]

Well, I don't know about the stepping up/down of voltages, but the video
equipment wont work here because of PAL/NTSC differences. I would think
that stepping down voltages would be easier, as its easier to remove
voltage, than it is to boost (?)

--
Kim..."A Man Of True Frankenstinean Proportions"

<gretagarbo85@yahoo.com> wrote in message
news:1107896639.978921.77250@l41g2000cwc.googlegroups.com...

Hi,

I am looking to buy an inkjet printer, DVD recorder with hard disk, and
home theater system. The problem is that I am living in Italy
(220V/50Hz) and may move to the U.S. (110V/60Hz) in the future. I
would the option to use these electronics in both countries.

I have the option of buying the products in the U.S., but would prefer
to buy them here in Italy. From a technical standpoint, is it better
to step down from 220/50 to 110/60 or step up?

I would like to avoid purchasing a voltage transformer/converter. Is
it feasible to have these products rewired by an electrician to handle
both voltages and frequencies?

I assume there is some form of a motor in all of these products. Is
this a problem as far as the frequency is concerned?

Thanks in advance for the help!

GG

 

[ILYA]

gretagarbo85@yahoo.com wrote:

Hi,

I am looking to buy an inkjet printer, DVD recorder with hard disk, and
home theater system. The problem is that I am living in Italy
(220V/50Hz) and may move to the U.S. (110V/60Hz) in the future. I
would the option to use these electronics in both countries.

I have the option of buying the products in the U.S., but would prefer
to buy them here in Italy. From a technical standpoint, is it better
to step down from 220/50 to 110/60 or step up?

I would like to avoid purchasing a voltage transformer/converter. Is
it feasible to have these products rewired by an electrician to handle
both voltages and frequencies?

I assume there is some form of a motor in all of these products. Is
this a problem as far as the frequency is concerned?

Thanks in advance for the help!

GG

Step-down transformer or Step-up transformer is practically equal,
because its just simple transformer, BUT:

Many devices has wide input power voltage and multiple standard support...
Price of plug adapter from Euro to US about 1-2$

U may buy multi-zone DVD-device or cracked DVD-devices...