Gadget of the month

T

Trevor Wilson

Guest
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.


--
Trevor Wilson
www.rageaudio.com.au
 
"Trevor Wilson" <trevor@rageaudio.com.au> wrote in message
news:3f9f185e$1@news.comindico.com.au...
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.


--
Trevor Wilson
Click to expand...

You're kidding! I saw these advertised and assumed they were junk....must
waddle out and get one!

Ken
(the fat bastard)
 
"Ken Taylor" <ken123@xtra.co.nz> wrote in message
news:EcGnb.1160$Mn.74008@news.xtra.co.nz...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote in message
news:3f9f185e$1@news.comindico.com.au...
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.


--
Trevor Wilson


You're kidding! I saw these advertised and assumed they were junk....must
waddle out and get one!
Click to expand...
**I don't think they're junk. The weighing part is toughened glass, which
adds nice 'heft' to the thing. The display is big and it's so easy to use,
you can chuck the instruction book. The mass measurement part seems to be
adequately accurate. I have no idea how accurate the fat measuring part is.
They claim 05%. Seems a bit optimistic to me, given the method of
measurement. As long as it provides a repeatable figure, I'm happy.


--
Trevor Wilson
www.rageaudio.com.au
 
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
Click to expand...
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.
The last time I tried
some of these scales out, they cost 500 Bucks.
Click to expand...
 
"Trevor Wilson" <trevor@rageaudio.com.au> wrote in message
news:3f9f3af2$1@news.comindico.com.au...
**I don't think they're junk. The weighing part is toughened glass, which
adds nice 'heft' to the thing. The display is big and it's so easy to use,
you can chuck the instruction book. The mass measurement part seems to be
adequately accurate. I have no idea how accurate the fat measuring part
is.
They claim 05%. Seems a bit optimistic to me, given the method of
measurement. As long as it provides a repeatable figure, I'm happy.
Click to expand...
They will measure ok till you have used them a dozen times. Then the
capacitive plates start bending and going out of cal. PS, I bet if you
placed a calibrated mass on them they would not be all that accurate.
 
"David Segall" <DavidSegall@nowhere.net> wrote in message
news:46mupv82if7mh3tgpgjijdo2qk41mjcql8@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.
Click to expand...
**Nope. Wrong. This puppy is MUCH more sophisticated. It measures body
resistivity. Lean muscle is less resistive than fat. I had already figured
out that much. The trick is to calculate OUT the skin resistance. This set
of scales does so, by measuring the skin resistance, then measuring the body
resistivity. Nifty stuff.


--
Trevor Wilson
www.rageaudio.com.au
 
On Wed, 29 Oct 2003 06:33:56 GMT, "Trevor Wilson"
<trevor@rageaudio.com.au> wrote:
"David Segall" <DavidSegall@nowhere.net> wrote in message
news:46mupv82if7mh3tgpgjijdo2qk41mjcql8@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.

**Nope. Wrong. This puppy is MUCH more sophisticated. It measures body
resistivity. Lean muscle is less resistive than fat. I had already figured
out that much. The trick is to calculate OUT the skin resistance. This set
of scales does so, by measuring the skin resistance, then measuring the body
resistivity. Nifty stuff.
Click to expand...
There are plenty of papers and reseach out there on these sorts of
"bioimpedance" techniques. An AC signal is used, possibly at different
frequencies. The calculations and models can get pretty complicated
indeed.
Jaycar also have a small hand held body fat analyser for about 25
bucks, also available in many other shops too. I have tried one out,
and while the readings are quite repeatable, the actual percentage
figure was at least 15% (body fat % points) higher than it should have
been in my case. So it seems that this one is a heap of junk, but
might be ok for relative measuremets over time. I have read that the
legs are the best place to perform the measurement, as they contain
much greater muscle bulk, and the leg muscles somehow conduct more
repeatably. I have found the feet based units to be quite repeatable
between different brands, and they give sensible figures compared with
traditional tests.

Dave :)
---------------------------
(remove the "_" from my email address to reply)
 
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

"David Segall" <DavidSegall@nowhere.net> wrote in message
news:46mupv82if7mh3tgpgjijdo2qk41mjcql8@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.

**Nope. Wrong. This puppy is MUCH more sophisticated. It measures body
resistivity. Lean muscle is less resistive than fat. I had already figured
out that much. The trick is to calculate OUT the skin resistance. This set
of scales does so, by measuring the skin resistance, then measuring the body
resistivity. Nifty stuff.
Try this Trevor. Stand on a piece of glad wrap or a piece of aluminum
Click to expand...
foil. I bet your scales will even give you the same answer then.
 
"David Segall" <DavidSegall@nowhere.net> wrote in message
news:knsupvsbilp0dub2gcflqv57sg1gl4apu2@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:


"David Segall" <DavidSegall@nowhere.net> wrote in message
news:46mupv82if7mh3tgpgjijdo2qk41mjcql8@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished
and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda
like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.

**Nope. Wrong. This puppy is MUCH more sophisticated. It measures body
resistivity. Lean muscle is less resistive than fat. I had already
figured
out that much. The trick is to calculate OUT the skin resistance. This
set
of scales does so, by measuring the skin resistance, then measuring the
body
resistivity. Nifty stuff.
Try this Trevor. Stand on a piece of glad wrap or a piece of aluminum
foil. I bet your scales will even give you the same answer then.
Click to expand...

**You'd lose that bet. I tried an insulator (a newspaper) and the scales
reported an "Error" message. Think about the alfoil thing.

BTW: Alfoil does affect the figures slightly, but not as much as a cursory
thought would provide.


--
Trevor Wilson
www.rageaudio.com.au
 
"David Segall" <DavidSegall@nowhere.net> wrote in message
news:knsupvsbilp0dub2gcflqv57sg1gl4apu2@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:


"David Segall" <DavidSegall@nowhere.net> wrote in message
news:46mupv82if7mh3tgpgjijdo2qk41mjcql8@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished
and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda
like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.

**Nope. Wrong. This puppy is MUCH more sophisticated. It measures body
resistivity. Lean muscle is less resistive than fat. I had already
figured
out that much. The trick is to calculate OUT the skin resistance. This
set
of scales does so, by measuring the skin resistance, then measuring the
body
resistivity. Nifty stuff.
Try this Trevor. Stand on a piece of glad wrap or a piece of aluminum
foil. I bet your scales will even give you the same answer then.
Click to expand...
**I don't know if you took notice of my original description of the scales.
Anyway, I'll elaborate:

* The instructions are very specific that bare feet must be used.
* Under each foot, are three conductors, which contact the feet, when in
use.
* The scales take a little time for measuring weight (about 3 seconds), but
around 10 seconds to calculate body fat.

I'll put the 'scope on the scales over weekend and look at the potential
difference (if it exists) of the conductors, when measuring.


--
Trevor Wilson
www.rageaudio.com.au
 
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

"David Segall" <DavidSegall@nowhere.net> wrote in message
news:knsupvsbilp0dub2gcflqv57sg1gl4apu2@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:


"David Segall" <DavidSegall@nowhere.net> wrote in message
news:46mupv82if7mh3tgpgjijdo2qk41mjcql8@4ax.com...
"Trevor Wilson" <trevor@rageaudio.com.au> wrote:

Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished
and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda
like
4-wire resistance analysis. Very impressive stuff.
I think you will find that it is a fairly simple calculator. It uses
your weight and the height and sex that you stored in it to compute
body fat based on a table of ideal weights . Here's the general idea
http://nhlbisupport.com/bmi/bmicalc.htm.

**Nope. Wrong. This puppy is MUCH more sophisticated. It measures body
resistivity. Lean muscle is less resistive than fat. I had already
figured
out that much. The trick is to calculate OUT the skin resistance. This
set
of scales does so, by measuring the skin resistance, then measuring the
body
resistivity. Nifty stuff.
Try this Trevor. Stand on a piece of glad wrap or a piece of aluminum
foil. I bet your scales will even give you the same answer then.


**You'd lose that bet. I tried an insulator (a newspaper) and the scales
reported an "Error" message. Think about the alfoil thing.

BTW: Alfoil does affect the figures slightly, but not as much as a cursory
thought would provide.
OK Trevor, I resile. I'll go out and buy one.
Click to expand...
 
Trevor Wilson <trevor@rageaudio.com.au> wrote:
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.
Click to expand...
Whatever anyone does, don't get the small handheld one. I bought two, one
for a friend, and both were absolutely crap. They gave about the same
reading no matter who used them - even when I shorted the two plates together
with some wire. It said my very skinny friend was overweight. In fact, it
said everybody was overweight. Both units did that. Needless to say, I
returned them.

Tanita body fat scales, which seem to be the most well known around, have
been at the $2xx mark for quite a while now. am quite sure Rebel Sport have
a $160'ish model.

Would it be possible for you to test out the accuracy of the scale?
Any idea if the body fat measurement is accurate?


thanks

--
removethis@optushome.com.au is a valid email address. Don't remove anything!
 
Would it be possible for you to test out the accuracy of the scale?
Any idea if the body fat measurement is accurate?
Click to expand...
As a total guess I would think they would be alright for measuring one's
relative change in body fat. As it measures from one leg to another it
must( Guessing here) only measure body fat stored in the legs. I would
think that x% body fat on some one who is "top heavy" would read lower than
someone who is "bottom heavy".

Mike
 
"mikegw" <mikegw20@hotmail.spammers.must.die.com> wrote in message
news:bnpou5$1fi$1@tomahawk.unsw.edu.au...
Would it be possible for you to test out the accuracy of the scale?
Any idea if the body fat measurement is accurate?


As a total guess I would think they would be alright for measuring one's
relative change in body fat. As it measures from one leg to another it
must( Guessing here) only measure body fat stored in the legs. I would
think that x% body fat on some one who is "top heavy" would read lower
than
someone who is "bottom heavy".

Mike

Well, I'm bottom heavy, so I'm told. :) I have a friend who's a dietician
Click to expand...
and she uses an electronic scales type of body-fat analyser, says they're
accurate, but obviously that'll depend on brand, etc. Not sure about the
Jaycar one obviously, but I may give it a try and compare with the gym
measurement using the (ouch!) calipers.

Ken
 
On Thu, 30 Oct 2003 12:29:53 +1100, "mikegw"
<mikegw20@hotmail.spammers.must.die.com> wrote:
Would it be possible for you to test out the accuracy of the scale?
Any idea if the body fat measurement is accurate?

As a total guess I would think they would be alright for measuring one's
relative change in body fat. As it measures from one leg to another it
must( Guessing here) only measure body fat stored in the legs. I would
think that x% body fat on some one who is "top heavy" would read lower than
someone who is "bottom heavy".

Mike
Click to expand...
There has been a lot of research into this, and some of the papers
make fascinating reading. Apparently there is a fairly solid
relationship between the leg bioimpedance measurements and overall
body fat percentage; for given population averages, ages, sex, weight
etc, which is why the units need to know this information.
No body fat test is 100% accurate and comparative, let alone these
bioimpedance units. But it looks as though the technology is fairly
mature these days that the repeatability and correlation with other
traditional tests is pretty good. Definitely better than the skin fold
test anyway, which is pretty much what these units are designed to
replace.
But as you mentioned, as a relative measure they are pretty good.
You can pay $$$$ for professional units too, don't know if they are
any better though.
The reading will also change before and after excercise, meals,
showers etc, so if you want the best reapeatability it's best to use
it the same time and under the same conditions every day.

Regards
Dave :)
---------------------------
(remove the "_" from my email address to reply)
 
Trevor Wilson <trevor@rageaudio.com.au> wrote:
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.
Click to expand...
OK I just picked one up today.

Trevor, would your bodyfat reading happen to be in the 23-24% range?

The scale is reminiscent of the handheld fat monitor that I tried a few
months back. No matter who uses it, it'll return a figure around 23-24% -
even if I shorted the two probes! It said my obviously skinny friends
were overweight, haha..

I did the same with this scale - I placed an aluminium flat across it and
measured the resistance between the left and right "sensors" (the three
tracks are connected to each other) to confirm that the sensors were being
shorted. Did the fat test, and surprise, 23.1%.

I squatted on the scale in such a way that my feet didn't touch the sensors,
and lightly placed my fingers on the sensors hoping to stuff up the
reading. I got 22.8%.

What sort of figures am I meant to get if I short the sensors? I assumed it
should cause an error.

I'm gonna try it with my skinny friend today. I have a feeling I'll get the
same problem as the handheld one... probably gonna return it tomorrow!


Weight-wise, it does seem to fluctuate a bit. A Tanita (they seem to be the
standard in bodyfat scales, and they're also known for accurate weight
readings) says I'm 67.2kg. The Jaycar one I tried at the store also said
67.2kg, but the one I brought back says 66.1 to 66.5kg. The tanita says 8%
body fat, the jaycar one says 23%. Both scales were used within two hours
of each other, on flat ground.





--
removethis@optushome.com.au is a valid email address. Don't remove anything!
 
"eug k" <removethis@optushome.com.au> wrote in message
news:bo7lc2$29d$1@bunyip.cc.uq.edu.au...
Trevor Wilson <trevor@rageaudio.com.au> wrote:
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and
the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It
seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.

OK I just picked one up today.

Trevor, would your bodyfat reading happen to be in the 23-24% range?

The scale is reminiscent of the handheld fat monitor that I tried a few
months back. No matter who uses it, it'll return a figure around 23-24% -
even if I shorted the two probes! It said my obviously skinny friends
were overweight, haha..

I did the same with this scale - I placed an aluminium flat across it and
measured the resistance between the left and right "sensors" (the three
tracks are connected to each other) to confirm that the sensors were being
shorted. Did the fat test, and surprise, 23.1%.

I squatted on the scale in such a way that my feet didn't touch the
sensors,
and lightly placed my fingers on the sensors hoping to stuff up the
reading. I got 22.8%.

What sort of figures am I meant to get if I short the sensors? I assumed
it
should cause an error.

I'm gonna try it with my skinny friend today. I have a feeling I'll get
the
same problem as the handheld one... probably gonna return it tomorrow!


Weight-wise, it does seem to fluctuate a bit. A Tanita (they seem to be
the
standard in bodyfat scales, and they're also known for accurate weight
readings) says I'm 67.2kg. The Jaycar one I tried at the store also said
67.2kg, but the one I brought back says 66.1 to 66.5kg. The tanita says 8%
body fat, the jaycar one says 23%. Both scales were used within two hours
of each other, on flat ground.

While I find the 8% body-fat figure hard to believe, unless you're a *real*
Click to expand...
keen marathon man, the 23% figure shows admirable consistency. :)

Ken
 
On 4 Nov 2003 07:44:02 GMT, eug k <removethis@optushome.com.au> wrote:

(snip)

The tanita says 8%
body fat, the jaycar one says 23%. Both scales were used within two hours
of each other, on flat ground.
Click to expand...
Shite!! You been eating Big Macs solid for two hours? Wotta hero!
 
On 4 Nov 2003 07:44:02 GMT, eug k <removethis@optushome.com.au> wrote:
Trevor Wilson <trevor@rageaudio.com.au> wrote:
Body fat analysis scales

Jaycar P# QM7249 On special for $110.00.

Mine arrived yesterday. Bloody rip-snorter. Nicely made and finished and the
thing works well.

I thought I could fool it, by standing on it with wet feet. Nope. It seems
to have several sensors which compensate for skin resistance. Kinda like
4-wire resistance analysis. Very impressive stuff. The last time I tried
some of these scales out, they cost 500 Bucks.

OK I just picked one up today.

Trevor, would your bodyfat reading happen to be in the 23-24% range?

The scale is reminiscent of the handheld fat monitor that I tried a few
months back. No matter who uses it, it'll return a figure around 23-24% -
even if I shorted the two probes! It said my obviously skinny friends
were overweight, haha..

I did the same with this scale - I placed an aluminium flat across it and
measured the resistance between the left and right "sensors" (the three
tracks are connected to each other) to confirm that the sensors were being
shorted. Did the fat test, and surprise, 23.1%.

I squatted on the scale in such a way that my feet didn't touch the sensors,
and lightly placed my fingers on the sensors hoping to stuff up the
reading. I got 22.8%.

What sort of figures am I meant to get if I short the sensors? I assumed it
should cause an error.

I'm gonna try it with my skinny friend today. I have a feeling I'll get the
same problem as the handheld one... probably gonna return it tomorrow!


Weight-wise, it does seem to fluctuate a bit. A Tanita (they seem to be the
standard in bodyfat scales, and they're also known for accurate weight
readings) says I'm 67.2kg. The Jaycar one I tried at the store also said
67.2kg, but the one I brought back says 66.1 to 66.5kg. The tanita says 8%
body fat, the jaycar one says 23%. Both scales were used within two hours
of each other, on flat ground.
Click to expand...
Exactly the same here.
I'm 7% - 8% with various foot based models, which is pretty much right
for me based on other methods too.
The crappy Jaycar handheld one shows around the 25% figure
consistantly. The same with other people I have tried it with too.
Body fat measurement is far from an exact science, and various greatly
with individual circumstances, but the Jaycar hand held unit isn't
even in the ball park.

Dave :)
---------------------------
(remove the "_" from my email address to reply)
 
On Tue, 4 Nov 2003 21:23:04 +1300, "Ken Taylor" <ken@home.nz> wrote:
Weight-wise, it does seem to fluctuate a bit. A Tanita (they seem to be
the
standard in bodyfat scales, and they're also known for accurate weight
readings) says I'm 67.2kg. The Jaycar one I tried at the store also said
67.2kg, but the one I brought back says 66.1 to 66.5kg. The tanita says 8%
body fat, the jaycar one says 23%. Both scales were used within two hours
of each other, on flat ground.

While I find the 8% body-fat figure hard to believe, unless you're a *real*
keen marathon man, the 23% figure shows admirable consistency. :)

Ken
Click to expand...
A body fat figure of under 10% can be quite common with males,
especially those of lean build and/or with considerable muscle bulk
percentage.

Regards
Dave :)
---------------------------
(remove the "_" from my email address to reply)
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top