Function generator manual

H

hermit50

Guest
Hi to all you guys.

I recently bought, (on ebay), a BLACKSTAR JUPITER 500 Function Generator 0.1Hz
500kHz
but there was no manual with it.

I'd like to get a manual if possible.
I've searched on Google, Ebay and Amazon, but so far i've had no luck.

Would any of you know where i might be able to get hold of a manual for this
item?

Any help in finding this manual would be greatly appreciated.

TIA
 
hermit50 wrote:
Hi to all you guys.

I recently bought, (on ebay), a BLACKSTAR JUPITER 500 Function Generator 0.1Hz
500kHz
but there was no manual with it.

I'd like to get a manual if possible.
I've searched on Google, Ebay and Amazon, but so far i've had no luck.

Would any of you know where i might be able to get hold of a manual for this
item?

Any help in finding this manual would be greatly appreciated.

TIA


Try:
http://www.schematicsforfree.mattsoft.net/
http://www.agtannenbaum.com/
http://www.manualsplus.com/
http://www.w7fg.com/
http://www.fullnet.com/u/tomg/manuals.htm
https://www.logsa.army.mil/etms/find_etm.cfm
http://bama.sbc.edu/
http://www.infotronix.us/
http://www.manuals4you.com/
ftp://bama.sbc.edu/downloads/
 
"Robert Baer" <robertbaer@earthlink.net> wrote in message
news:K3kfe.10553$HL2.7578@newsread3.news.pas.earthlink.net...
hermit50 wrote:
Hi to all you guys.

I recently bought, (on ebay), a BLACKSTAR JUPITER 500 Function Generator
0.1Hz
500kHz
but there was no manual with it.

I'd like to get a manual if possible.
I've searched on Google, Ebay and Amazon, but so far i've had no luck.

Would any of you know where i might be able to get hold of a manual for this
item?

Any help in finding this manual would be greatly appreciated.

TIA


Try:
http://www.schematicsforfree.mattsoft.net/
http://www.agtannenbaum.com/
http://www.manualsplus.com/
http://www.w7fg.com/
http://www.fullnet.com/u/tomg/manuals.htm
https://www.logsa.army.mil/etms/find_etm.cfm
http://bama.sbc.edu/
http://www.infotronix.us/
http://www.manuals4you.com/
ftp://bama.sbc.edu/downloads/


Hi Robert

Thanks for the reply.

I'll take a look at the links you provided to see if i have any luck.


hermit50
 

Welcome to EDABoard.com

Sponsor

Back
Top