fuel injectors

[sirellis]

hey all any1 have any ideas on how to power car fuel injectors whilst in an ultrasonic bath for cleaning say a variable voltage of 5-15volt and pulsing on/off at 1,500-10,000 rpm for back flushing any help would be great thanx Pete




----------
Sent via SPRACI - http://www.spraci.com/ - Parties,Raves,Clubs,Festivals

 

[The Real Andy]

On 10 Jun 2005 15:19:39 GMT, sirellis <sirellis01@optusnet.com.au>
wrote:

hey all any1 have any ideas on how to power car fuel injectors whilst in an ultrasonic bath for cleaning say a variable voltage of 5-15volt and pulsing on/off at 1,500-10,000 rpm for back flushing any help would be great thanx Pete

some commercial units i have seen actually run a presurised solvent
throgh the injector whilst pulsing it on and off. If this is for a one
off, go pay someone to clean them. If its for commercial use, buy a
professional unit.

 

[spock]

"The Real Andy" <will_get_back_to_you_on_This> wrote in message
news:qpdka195boaa7o22dm50mdjfvd51r9hpfl@4ax.com...

On 10 Jun 2005 15:19:39 GMT, sirellis <sirellis01@optusnet.com.au
wrote:

hey all any1 have any ideas on how to power car fuel injectors whilst in
an ultrasonic bath for cleaning say a variable voltage of 5-15volt and
pulsing on/off at 1,500-10,000 rpm for back flushing any help would be
great thanx Pete




some commercial units i have seen actually run a presurised solvent
throgh the injector whilst pulsing it on and off. If this is for a one
off, go pay someone to clean them. If its for commercial use, buy a
professional unit.

At $25 per injector you can buy a new set for less asuming 6cylinder.