FS: Tubes / sockets

  • Thread starter Marv_E_Ads@juno.com
  • Start date
M

Marv_E_Ads@juno.com

Guest
****** TUBES ******

--- Planar Tubes (used)--- Take the last 7 for $25 or... $ 5ea

322 7698(pair) Y602B Y2177(pair) EE144

---- Lighthouse tubes ----
2C46 pull $3

---- Pencil tubes ------
6442 pull $5 ea
7554 pull $5

*** 75 or so Nuvistors -- $50 for all ***

Most look like pulls, some are in boxes and some may be new.
The collection includes: 6CW4 6DS4 6DV4 7586 7595 8393

**********

These are all old RCA, Sylvania, GE, etc. No "Realistic", or modern
imports in the group.

5654/6AK5W GE NIB 5 for $15
5654 pulls four for $7

6AL5 RCA NIB 5 for $15

6ER5 RCA NIB $5

5879, 7056, 7551 NIB $5 ea

5879 pulls four for $10

*** Lot of tubes for Collins Radios -- $30 ***
6146A RCA NIB 6BN8 (4) 6U8A (6) 6EA8 (2) and 12AT7 (2) The
little ones are all in boxes -- some are new, some are pulls.

*** More tubes ***

15E Eimac NIB $20
6DQ6B RCA likely NIB + GE 6DQ6B pull -- $10 both
4637 (RCA) pull $30
6481 new $50
6883B/8032A/8552 GE NIB $15 ea.

12AU7A matched pairs NOS -- Tektronix part number 157-0049-00. Each
dual
compartment box contains a matched and serial numbered pair of new old
stock RCA 12AU7A's. $20 pair; 3 sets available


***** TUBE SOCKETS and ACCESSORIES *****

Birnbach 434 "50 watt" socket. Base is cracked clean through adjacent
to contacts, not noticeable from the top. Still quite useable as-is,
or glue it. $8

Eimac HR-8 plate disspator used, a mite tarnished $10

Eimac HR-6 plate disspator used, a mite tarnished $6

Eimac HR-6 plate dissipators, NOS pair $20.

Eimac HR-3 plate disspators (.072 hole) $2ea
Larger fin version of above (by Bud?) $3ea

Erie Chemflex SO-427-3 Teflon insulated 7 pin miniature tube sockets
including saddle w/ lugs, NOS -- $5 ea

Johnson 122-248 socket, with base ring & ceramic spring retained
(parallel) plate bar. Used, good condition. $10


All of the above plus shipping, if necessary, naturally.

Contact: Marv WC6W 310 649 3111 (reasonable hours Pacific Time
please)

or via: Marv_E_Ads@Juno.com








*
 

Welcome to EDABoard.com

Sponsor

Back
Top