R
Richard W. Solomon, W1KSZ
Guest
FOR SALE:
HP 8341A SYNTHESIZED SWEEP GENERATOR $1,250
ˇ Frequency range: 10 MHz - 20.0 GHz
ˇ Frequency resolution: 1 to 4 Hz
ˇ Output range: +10 dBm to -20 dBm
ˇ Output level resolution: 0.1 dB
ˇ Internal level accuracy: ą0.9 dB
ˇ Internal flatness: ą0.6 dB to ą1.5 dB depending on output
level range
ˇ Phase noise: -57 dBc to -107 dBc / 1 Hz noise bw
ˇ AM modulation
Long term stability is excellent at 1x10-9/day
ˇ HP-IB interface
ˇ Analog Sweep width from 100 Hz to full frequency range
ˇ Up to 5 Frequency Markers selectable
ˇ Long-term stability of 1 x 10 exp-9/day
HP 35660A DUAL CHANNEL DYNAMIC SIGNAL ANALYZER $450
The 35660A Dual-Channel, Dynamic Signal Analyzer is an FFT-based
instrument that provides spectrum and network measurements in
electronics, mechanical test, acoustics, and other low frequency
application areas. The analyzer also offers built-in test and
automation features, traditionally available only with a computer. The
unit performs spectrum analysis from 488ľHz to 102.4kHz and network
analysis from 244ľHz to 51.2kHz. The FFT provides 401 lines of
resolution in both one- and two-channel modes. Accuracy is ą0.003% of
frequency reading.
BOTH ITEMS ARE PICK-UP ONLY IN LEXINGTON, MA.
Regards,
Dick, W1KSZ
HP 8341A SYNTHESIZED SWEEP GENERATOR $1,250
ˇ Frequency range: 10 MHz - 20.0 GHz
ˇ Frequency resolution: 1 to 4 Hz
ˇ Output range: +10 dBm to -20 dBm
ˇ Output level resolution: 0.1 dB
ˇ Internal level accuracy: ą0.9 dB
ˇ Internal flatness: ą0.6 dB to ą1.5 dB depending on output
level range
ˇ Phase noise: -57 dBc to -107 dBc / 1 Hz noise bw
ˇ AM modulation
Long term stability is excellent at 1x10-9/day
ˇ HP-IB interface
ˇ Analog Sweep width from 100 Hz to full frequency range
ˇ Up to 5 Frequency Markers selectable
ˇ Long-term stability of 1 x 10 exp-9/day
HP 35660A DUAL CHANNEL DYNAMIC SIGNAL ANALYZER $450
The 35660A Dual-Channel, Dynamic Signal Analyzer is an FFT-based
instrument that provides spectrum and network measurements in
electronics, mechanical test, acoustics, and other low frequency
application areas. The analyzer also offers built-in test and
automation features, traditionally available only with a computer. The
unit performs spectrum analysis from 488ľHz to 102.4kHz and network
analysis from 244ľHz to 51.2kHz. The FFT provides 401 lines of
resolution in both one- and two-channel modes. Accuracy is ą0.003% of
frequency reading.
BOTH ITEMS ARE PICK-UP ONLY IN LEXINGTON, MA.
Regards,
Dick, W1KSZ