FPGA Development board with onboard Ethernet PHY

[Anup Raghavan]

Hello, I am looking for a FPGA development/prototyping board that has a
RJ45 connector and on board PHY chip. Can I get recommendations?

Thanks

 

[Petter Gustad]

Anup Raghavan <anupr@ieee.org> writes:

Hello, I am looking for a FPGA development/prototyping board that has a
RJ45 connector and on board PHY chip. Can I get recommendations?

The Altera NIOS Developer Kit, Stratix or Cyclone edition. It has a
LAN91C111 Ethernet interface:

http://www.altera.com/products/devkits/altera/kit-nios_1S10.html

Petter
--
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing on usenet and in e-mail?

 

[Dave Vanden Bout]

Anup Raghavan <anupr@ieee.org> wrote in news:40F95608.B3C86E63@ieee.org:

Hello, I am looking for a FPGA development/prototyping board that has a
RJ45 connector and on board PHY chip. Can I get recommendations?

Thanks

The XSB-300E (http://www.xess.com/prod032.php3) has an RJ45 connector and a
ASIS 88796 MAC+PHY, but I believe you can access just the PHY part.

-----------------------------------------------------------------
Dr. Dave Van den Bout
XESS Corp.
PO Box 33091
Raleigh NC 27636
Phn: (919) 363-4695
Fax: (801) 749-6501
devb@xess.com
http://www.xess.com

 

[Anup Raghavan]

Thanks y'all for your directions.

Anup


Anup Raghavan wrote:

Hello, I am looking for a FPGA development/prototyping board that has a
RJ45 connector and on board PHY chip. Can I get recommendations?

Thanks

 

[John Adair]

We can supply Broaddown2 with a plug-in PHY and RJ45 module. Details are
here http://www.enterpoint.co.uk/moelbryn/broaddown2.html . Board will
operate stand-alone or in PCI slot.

--
John Adair
Enterpoint Ltd. - Home of Broaddown2. The Ultimate Spartan3 Development
Board.
http://www.enterpoint.co.uk


"Anup Raghavan" <anupr@ieee.org> wrote in message
news:40F95608.B3C86E63@ieee.org...

Hello, I am looking for a FPGA development/prototyping board that has a
RJ45 connector and on board PHY chip. Can I get recommendations?

Thanks

 

[Marc]

You can get from www.devboards.de a PHY daughter card with a National
10/100/1000 PHY that fits on all Altera evaluation boards.

Best Regards,

Marc

Anup Raghavan <anupr@ieee.org> wrote in message news:<40FA01E6.B7F56D88@ieee.org>...

Thanks y'all for your directions.

Anup


Anup Raghavan wrote:

Hello, I am looking for a FPGA development/prototyping board that has a
RJ45 connector and on board PHY chip. Can I get recommendations?

Thanks