FPGA / CPLD Group on LinkedIn -- Networking Group

C

cpld-fpga-asic

Guest
Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

Networking on LinkedIn can be a way to get technical questions
answered. It can also be a way to meet contacts with expertise in
other domains of knowledge other than your own. Additionally, many
career enhancing contacts, and mentors can potentially found
especially if one is at a smaller company that lacks the resources for
extensive internal networking.

http://www.linkedin.com/groups?about=&gid=56713

Website: https://sites.google.com/site/fpgacpldgroup/
 
On Jun 28, 5:09 pm, cpld-fpga-asic <cpld.fpga.a...@gmail.com> wrote:
Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

Networking on LinkedIn can be a way to get technical questions
answered. It can also be a way to meet contacts with expertise in
other domains of knowledge other than your own. Additionally, many
career enhancing contacts, and mentors can potentially found
especially if one is at a smaller company that lacks the resources for
extensive internal networking.

http://www.linkedin.com/groups?about=&gid=56713

Website:https://sites.google.com/site/fpgacpldgroup/
Click to expand...
could you describe the last technical FPGA related question
that your linkedin networking group solved?

unless you are able todo that, i see you repeated postings
to c.a.f. as complete spam

Antti
 
On Mon, 29 Jun 2009 23:08:16 +0800, rickman wrote
(in article
<68320efd-477b-4818-95dd-d4639d7e2cd1@n19g2000vba.googlegroups.com>):

On Jun 28, 10:52 am, "Antti.Luk...@googlemail.com"
Antti.Luk...@googlemail.com> wrote:
On Jun 28, 5:09 pm, cpld-fpga-asic <cpld.fpga.a...@gmail.com> wrote:



Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

Networking on LinkedIn can be a way to get technical questions
answered. It can also be a way to meet contacts with expertise in
other domains of knowledge other than your own. Additionally, many
career enhancing contacts, and mentors can potentially found
especially if one is at a smaller company that lacks the resources for
extensive internal networking.

http://www.linkedin.com/groups?about=&gid=56713

Website:https://sites.google.com/site/fpgacpldgroup/

could you describe the last technical FPGA related question
that your linkedin networking group solved?

unless you are able todo that, i see you repeated postings
to c.a.f. as complete spam

Antti

Hi, I am one of the moderators at this group and I must be honest
about it. It is not a very technically oriented group. I have tried
to make some technically oriented posts there with few responses.
This did not seem to stimulate much in the way of subsequent new
topics either. I have also made an effort to separate the technical
content from the recruiting content and gotten feedback that the
recruiters are the ones paying the way for LinkedIn and cutting them
out would be a mistake.

So I have given up on this group as well as other FPGA related groups
at LinkedIn. I have not removed myself from membership, but I can't
say I recommend them unless you wish to use it for employment or self
promotion.

Rick
Click to expand...
I'm completely confused as to how you can have a FPGA group that is not
"technically orientated" , it would be like having a flower arranging class
without the flowers.
 
On Jul 2, 8:23 pm, steve <st...@aol.com> wrote:
On Mon, 29 Jun 2009 23:08:16 +0800, rickman wrote
(in article
68320efd-477b-4818-95dd-d4639d7e2...@n19g2000vba.googlegroups.com>):



On Jun 28, 10:52 am, "Antti.Luk...@googlemail.com"
Antti.Luk...@googlemail.com> wrote:
On Jun 28, 5:09 pm, cpld-fpga-asic <cpld.fpga.a...@gmail.com> wrote:

Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

Networking on LinkedIn can be a way to get technical questions
answered. It can also be a way to meet contacts with expertise in
other domains of knowledge other than your own. Additionally, many
career enhancing contacts, and mentors can potentially found
especially if one is at a smaller company that lacks the resources for
extensive internal networking.

http://www.linkedin.com/groups?about=&gid=56713

Website:https://sites.google.com/site/fpgacpldgroup/

could you describe the last technical FPGA related question
that your linkedin networking group solved?

unless you are able todo that, i see you repeated postings
to c.a.f. as complete spam

Antti

Hi, I am one of the moderators at this group and I must be honest
about it.  It is not a very technically oriented group.  I have tried
to make some technically oriented posts there with few responses.
This did not seem to stimulate much in the way of subsequent new
topics either.  I have also made an effort to separate the technical
content from the recruiting content and gotten feedback that the
recruiters are the ones paying the way for LinkedIn and cutting them
out would be a mistake.

So I have given up on this group as well as other FPGA related groups
at LinkedIn.  I have not removed myself from membership, but I can't
say I recommend them unless you wish to use it for employment or self
promotion.

Rick

 I'm completely confused as to how you can have a FPGA  group that is not  
"technically orientated" , it would be like having a flower arranging class
without the flowers.
Click to expand...
There are other aspects to any occupation than just the technical
issues. LinkedIn is oriented toward the business issues such as
getting a job or filling a job. As much as I would like to see it be
more technical, it seems like it is pretty firmly rooted in networking
with technical discussions being secondary.

Is it really that odd to consider?

Rick
 
"rickman" <gnuarm@gmail.com> wrote in message
news:8d00a3a1-3187-4421-aed4-6b1df3c71b97@s9g2000yqd.googlegroups.com...
On Jul 2, 8:23 pm, steve <st...@aol.com> wrote:
There are other aspects to any occupation than just the technical
issues. LinkedIn is oriented toward the business issues such as
getting a job or filling a job. As much as I would like to see it be
more technical, it seems like it is pretty firmly rooted in networking
with technical discussions being secondary.

Is it really that odd to consider?

Rick
Click to expand...

A bigger problem is how technical discussions are set up (or at least used
to be set up when I last looked) and viewed on LinkedIn. Answering questions
is supposed to earn you points to improve your image. The questions remain
active for only limited period of time upon expiration of which no one can
contribute. Finally, you need to be a premium (read paid) member to be able
to send a private message to another member.


/Mikhail
 
"rickman" <gnuarm@gmail.com> wrote in message
news:7c6c7876-8296-41e1-8ec9-b2a13f6da403@a36g2000yqc.googlegroups.com...
On Jul 3, 1:47 pm, "MM" <mb...@yahoo.com> wrote:
I have not seen anything about points on LinkedIn. I think the only
way to "improve" your image at LinkedIn is what you put in your
profile. LinkedIn does not rate anyone that I am aware of.

I think you may be remembering a different site than LinkedIn. They
don't limit the time to reply to a discussion and I am not a paid
member and I can send private messages. If I could find you, I would
send you a private message to demonstrate, but there are a lot of
Mikhails on LinkedIn.
Click to expand...
I should have put points in quote marks. There is no rating, but there is an
option to see all the answers by a person. I am not confusing LinkedIn with
another site but I might be confusing discussions in its groups with its
Answers section though. With regards to the private mail, it seems as they
have recently changed their policy. It used to be that you could only send a
message to someone in your network, for anyone else the only type of message
you could send was an invitation to join your network.


/Mikhail
 
On Jul 3, 1:47 pm, "MM" <mb...@yahoo.com> wrote:
"rickman" <gnu...@gmail.com> wrote in message

news:8d00a3a1-3187-4421-aed4-6b1df3c71b97@s9g2000yqd.googlegroups.com...
On Jul 2, 8:23 pm, steve <st...@aol.com> wrote:



There are other aspects to any occupation than just the technical
issues.  LinkedIn is oriented toward the business issues such as
getting a job or filling a job.  As much as I would like to see it be
more technical, it seems like it is pretty firmly rooted in networking
with technical discussions being secondary.

Is it really that odd to consider?

Rick

A bigger problem is how technical discussions are set up (or at least used
to be set up when I last looked) and viewed on LinkedIn. Answering questions
is supposed to earn you points to improve your image. The questions remain
active for only limited period of time upon expiration of which no one can
contribute. Finally, you need to be a premium (read paid) member to be able
to send a private message to another member.

/Mikhail
Click to expand...
I have not seen anything about points on LinkedIn. I think the only
way to "improve" your image at LinkedIn is what you put in your
profile. LinkedIn does not rate anyone that I am aware of.

I think you may be remembering a different site than LinkedIn. They
don't limit the time to reply to a discussion and I am not a paid
member and I can send private messages. If I could find you, I would
send you a private message to demonstrate, but there are a lot of
Mikhails on LinkedIn.

Rick
 
On Jul 3, 3:46 pm, "MM" <mb...@yahoo.com> wrote:
"rickman" <gnu...@gmail.com> wrote in message

news:7c6c7876-8296-41e1-8ec9-b2a13f6da403@a36g2000yqc.googlegroups.com...
On Jul 3, 1:47 pm, "MM" <mb...@yahoo.com> wrote:



I have not seen anything about points on LinkedIn. I think the only
way to "improve" your image at LinkedIn is what you put in your
profile. LinkedIn does not rate anyone that I am aware of.

I think you may be remembering a different site than LinkedIn. They
don't limit the time to reply to a discussion and I am not a paid
member and I can send private messages. If I could find you, I would
send you a private message to demonstrate, but there are a lot of
Mikhails on LinkedIn.

I should have put points in quote marks. There is no rating, but there is an
option to see all the answers by a person. I am not confusing LinkedIn with
another site but I might be confusing discussions in its groups with its
Answers section though. With regards to the private mail, it seems as they
have recently changed their policy. It used to be that you could only send a
message to someone in your network, for anyone else the only type of message
you could send was an invitation to join your network.

/Mikhail
Click to expand...
I believe you are correct about the change. I don't use it that often
so I don't recall all the details, but I seem to recall that when I
tried to contact someone a while back I had to "invite" them to my
network. Fortunately that has changed now.

I'm not at all familiar with the Answers section. I guess I just have
not explored it a lot. I find the interface to be a bit less than
obvious, but then I think that about a lot of web sites like Facebook
and Twitter.

For example, I can't find a way to reach a human at Twitter to report
spam to or to ask to block emails to my domain. I keep getting form
emails back about using their support web pages. I guess I will have
to resort to the post office.

Speaking of Twitter, I got some spam (an invitation to join as one of
their "twits") from someone there and I can't find a way to report
them. There used to be a law here in Maryland that would allow you to
sue a spammer for $500 for each email they knowingly sent to a
Maryland state resident. A guy decided to fight back by taking an
email address at <marylandstateresident.com> and started suing
spammers. He snared a couple of small time spammers selling BS
assembly projects that you could assemble and then get paid for. Of
course no one ever made them good enough to get through "quality
control". Then a spammer fought back and won in court with the ruling
that it would be next to impossible for a spammer to "know" he was
spamming a Maryland state resident. Otherwise participation by the
State Attorney General is required in order to sue a spammer if I
understand the current law.

Rick
 
"rickman" <gnuarm@gmail.com> wrote
For example, I can't find a way to reach a human at Twitter
Click to expand...
Why on earth a grown man would want to use Twitter? :)

/Mikhail
 
On Jul 4, 11:02 pm, "MM" <mb...@yahoo.com> wrote:
"rickman" <gnu...@gmail.com> wrote



For example, I can't find a way to reach a human at Twitter

Why on earth a grown man would want to use Twitter? :)

/Mikhail
Click to expand...
I'm not trying to *use* it, I want them to stop sending me junk
email! Didn't you read the post?

Rick
 
steve <steve@aol.com> wrote:

On Mon, 29 Jun 2009 23:08:16 +0800, rickman wrote
(in article
68320efd-477b-4818-95dd-d4639d7e2cd1@n19g2000vba.googlegroups.com>):

On Jun 28, 10:52=A0am, "Antti.Luk...@googlemail.com"
Antti.Luk...@googlemail.com> wrote:
On Jun 28, 5:09=A0pm, cpld-fpga-asic <cpld.fpga.a...@gmail.com> wrote:



Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

could you describe the last technical FPGA related question
that your linkedin networking group solved?

unless you are able todo that, i see you repeated postings
to c.a.f. as complete spam

Antti

Hi, I am one of the moderators at this group and I must be honest
about it. It is not a very technically oriented group. I have tried
to make some technically oriented posts there with few responses.
out would be a mistake.

So I have given up on this group as well as other FPGA related groups
at LinkedIn. I have not removed myself from membership, but I can't
say I recommend them unless you wish to use it for employment or self
promotion.

Rick

I'm completely confused as to how you can have a FPGA group that is not
"technically orientated" , it would be like having a flower arranging class
without the flowers.
Click to expand...
LinkedIn is not about solving problems. It is about hiring the right
people to solve problems. To get back to your example: you could find
someone thru LinkedIn that can arrange the flowers for you.

--
Failure does not prove something is impossible, failure simply
indicates you are not using the right tools...
"If it doesn't fit, use a bigger hammer!"
--------------------------------------------------------------
 
On Sun, 5 Jul 2009 16:23:01 +0800, Nico Coesel wrote
(in article <4a506294.2904187875@news.planet.nl>):

steve <steve@aol.com> wrote:

On Mon, 29 Jun 2009 23:08:16 +0800, rickman wrote
(in article
68320efd-477b-4818-95dd-d4639d7e2cd1@n19g2000vba.googlegroups.com>):

On Jun 28, 10:52=A0am, "Antti.Luk...@googlemail.com"
Antti.Luk...@googlemail.com> wrote:
On Jun 28, 5:09=A0pm, cpld-fpga-asic <cpld.fpga.a...@gmail.com> wrote:



Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

could you describe the last technical FPGA related question
that your linkedin networking group solved?

unless you are able todo that, i see you repeated postings
to c.a.f. as complete spam

Antti

Hi, I am one of the moderators at this group and I must be honest
about it. It is not a very technically oriented group. I have tried
to make some technically oriented posts there with few responses.
out would be a mistake.

So I have given up on this group as well as other FPGA related groups
at LinkedIn. I have not removed myself from membership, but I can't
say I recommend them unless you wish to use it for employment or self
promotion.

Rick

I'm completely confused as to how you can have a FPGA group that is not
"technically orientated" , it would be like having a flower arranging class
without the flowers.

LinkedIn is not about solving problems. It is about hiring the right
people to solve problems. To get back to your example: you could find
someone thru LinkedIn that can arrange the flowers for you.
Click to expand...
we are not talking about "linkedin" ,we are talking about a technical group
within the "LI" network.
If you cannot keep up, there is Lego and crayons over in the play area.
 
On Mon, 6 Jul 2009 21:02:42 +0800, steve <steve@aol.com> wrote:

we are not talking about "linkedin" ,we are talking about a technical group
within the "LI" network.
If you cannot keep up, there is Lego and crayons over in the play area.
Click to expand...
Ah, the New Media Priesthood. Their mantra: If you
Don't Get It, we will patronize you to death.

Me, I definitely Don't Get It, and I really don't
care all that much, and I've been patronized in
the past by people I respect a lot more than the
Noo Meeja Vangelists, so I don't feel too worried.

Is there a LinkedIn group for elderly curmudgeons?
I'm in there...
--
Jonathan Bromley, Consultant

DOULOS - Developing Design Know-how
VHDL * Verilog * SystemC * e * Perl * Tcl/Tk * Project Services

Doulos Ltd., 22 Market Place, Ringwood, BH24 1AW, UK
jonathan.bromley@MYCOMPANY.com
http://www.MYCOMPANY.com

The contents of this message may contain personal views which
are not the views of Doulos Ltd., unless specifically stated.
 
On Jul 6, 9:12 am, Jonathan Bromley <jonathan.brom...@MYCOMPANY.com>
wrote:
On Mon, 6 Jul 2009 21:02:42 +0800, steve <st...@aol.com> wrote:
we are not talking about "linkedin"  ,we are talking about a technical group
within the  "LI" network.
If you cannot keep up, there  is Lego and crayons over in the play area.

Ah, the New Media Priesthood.  Their mantra: If you
Don't Get It, we will patronize you to death.

Me, I definitely Don't Get It, and I really don't
care all that much, and I've been patronized in
the past by people I respect a lot more than the
Noo Meeja Vangelists, so I don't feel too worried.

Is there a LinkedIn group for elderly curmudgeons?
I'm in there...
--
Jonathan Bromley, Consultant
Click to expand...
I haven't found one, but you can start it! I'll probably join as
well. What is it about getting old anyway???

Rick
 
On Jun 28, 10:52 am, "Antti.Luk...@googlemail.com"
<Antti.Luk...@googlemail.com> wrote:
On Jun 28, 5:09 pm, cpld-fpga-asic <cpld.fpga.a...@gmail.com> wrote:



Group for People Involved In the Design and Verification of FPGA's,
other Programmable Logic , and CPLD's to Exchange Idea's and
Techniques. You should have FPGA / CPLD Design / Verification on your
Profile. (The focus is more on FPGA/CPLD in the product as opposed to
FPGA's solely as a path to an ASIC) VHDL / Verilog / ABLE / SystemC
and other HDL's as well. Vendors included: Xilinx, Altera, Actel,
Lattice, Atmel, QuickLogic, Tabula, Silicon Blue, Mentor, Cadence,
Synopsys, Aldec, NI, Altium, and Many Others.

Networking on LinkedIn can be a way to get technical questions
answered. It can also be a way to meet contacts with expertise in
other domains of knowledge other than your own. Additionally, many
career enhancing contacts, and mentors can potentially found
especially if one is at a smaller company that lacks the resources for
extensive internal networking.

http://www.linkedin.com/groups?about=&gid=56713

Website:https://sites.google.com/site/fpgacpldgroup/

could you describe the last technical FPGA related question
that your linkedin networking group solved?

unless you are able todo that, i see you repeated postings
to c.a.f. as complete spam

Antti
Click to expand...
Hi, I am one of the moderators at this group and I must be honest
about it. It is not a very technically oriented group. I have tried
to make some technically oriented posts there with few responses.
This did not seem to stimulate much in the way of subsequent new
topics either. I have also made an effort to separate the technical
content from the recruiting content and gotten feedback that the
recruiters are the ones paying the way for LinkedIn and cutting them
out would be a mistake.

So I have given up on this group as well as other FPGA related groups
at LinkedIn. I have not removed myself from membership, but I can't
say I recommend them unless you wish to use it for employment or self
promotion.

Rick
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top