FPGA Board with Flash Memory

[Basuki Endah Priyanto]

Hello all,

I am looking for a FPGA board (preferably: Xilinx SPARTAN 100k-300k gates) with flash memory attached on the board itself to store the bit file.

Anyone can help me or just gimme the URL ?

Thanks.

-Basuki-

 

[Martin Maurer]

Hello Basuki,

have a look at

http://www.trenz-electronic.de/prod/prodde6.htm and their shop under
http://www.te-shop.de/ (but currently not reachable).

They have a spartan II board with onboard socket for flash (for bitstream).
If you need real flash and sram, they have an extension board for it.

Regards,

Martin

 

[Dave Vanden Bout]

"Basuki Endah Priyanto" <EBEPriyanto@ntu.edu.sg> wrote in
news:Z6dbuF#PEHA.2168@exchnews1.main.ntu.edu.sg:

Hello all,

I am looking for a FPGA board (preferably: Xilinx SPARTAN 100k-300k
gates) with flash memory attached on the board itself to store the bit
file.

Anyone can help me or just gimme the URL ?

http://www.xess.com/prod026.php3


SpartanII (not Spartan). 2 Mbit flash on the board that can be used for
storing bitstreams or data.

Thanks.

-Basuki-

--
----------------------------------------------------------------
Dr. Dave Van den Bout
XESS Corp.
PO Box 33091
Raleigh NC 27636
Phn: (919) 363-4695
Fax: (801) 749-6501
devb@xess.com
http://www.xess.com

 

[John Adair]

We can certain meet your requirements with our new product Broaddown2. Look
here http://www.enterpoint.co.uk/moelbryn/broaddown2.html .


John Adair
Enterpoint Ltd. - Home of Broaddown2
http://www.enterpoint.co.uk

This message is the personal opinion of the sender and not that necessarily
that of Enterpoint Ltd.. Readers should make their own evaluation of the
facts. No responsibility for error or inaccuracy is accepted.
"Basuki Endah Priyanto" <EBEPriyanto@ntu.edu.sg> wrote in message
news:Z6dbuF%23PEHA.2168@exchnews1.main.ntu.edu.sg...

Hello all,

I am looking for a FPGA board (preferably: Xilinx SPARTAN 100k-300k gates)
with flash memory attached on the board itself to store the bit file.

Anyone can help me or just gimme the URL ?

Thanks.

-Basuki-