FORD E250 piezo buzzer

Suggestions on wiring add on buzzers for example into the flasher circuit ?

 

On Thursday, August 20, 2015 at 9:41:41 PM UTC-4, avag...@gmail.com wrote:

Suggestions on wiring add on buzzers for example into the flasher circuit ?

-0

https://goo.gl/NgWjQQ

if a wire is run from grnd light to buzzer then the buzzer buzzes n does not grnd the system ? yes/no

but this would buzz when lights are on so a buzzer connection needs go at the ground flashers with diode ?

 

bbb bbbbbb bbbzzzzzzzzzzzzzzzzzzzzick

 

On Saturday, August 22, 2015 at 6:37:30 PM UTC-4, avag...@gmail.com wrote:
> bbb bbbbbb bbbzzzzzzzzzzzzzzzzzzzzick

with 11 views including Cress ? we assume THERE'S A LOTTA DEAF FORD OWNERS HERE....

 

[Rheilly Phoull]

wrote in message
news:3e4b3d6b-b13c-40ff-a2e8-8ca5f33baad7@googlegroups.com...

Suggestions on wiring add on buzzers for example into the flasher circuit ?

Don't know much about yank cars but I'd start off with a couple of diodes
from each side lamp circuit going into the piezo (assuming it is a self
powered unit).

left----0------------ gnd
|--->---
0 piezo
|--->--
right--0------------ gnd