For Prototype 2 layer PTH PCBs

[Sotris]

The prices for a single 2 layers 1dm2 full prototype is only 20Euro
without VAT for foreign countries? What is the VAT if it will apply
(ie. with invoice inside EU)?
thanks

danai (easy_pcb@yahoo.com)
For Prototype 2 layer PTH PCBs
View: Original Format
Groups:sci.electronics.cad, sci.electronics.design,
sci.electronics.basics
2004-11-26 11:01:10 PST

If you want to get your double-sided PTH boards (either 1 to 5
prototypes or mass production), made with High Quality PCB

material(European, NOT from far-east), silkscreen, solder resist etc.
at LOW PRICES (all at Euro) then take a look at:
www.geocities.com/easy_pcb
Regards
Danai

 

[Paul Burke]

Sotris wrote:

The prices for a single 2 layers 1dm2 full prototype is only 20Euro
without VAT for foreign countries? What is the VAT if it will apply
(ie. with invoice inside EU)?
thanks

The service looks OK at first glance, though the design limitations are
rather coarse (15 thou track/ space, 0.5mm holes). I'd be happier to
have a physical address of this Greek concern.

If you have a VAT number, send him that, and he won't charge you VAT
assuming he's VAT registered in Greece. You have to declare it and pay
VAT in your own country, but you can claim it back. Otherwise he charges
you VAT at Greek rates. It's bizzarre, but that's the rules.

Paul Burke

 

[Anders F]

I've got to mention www.run.to/pcb (Olimex) here. 26US for a Euro-board
(10x16cm) - and cheap shipping!
Been providing multiple fine prototypes for me. They are cheap - but silk
screen is seen of better quality and the pcbs are cut (not routed). But
Tsvetan panelize/cut for free: Not many will take an order like: "2pcs PCB-A
and fill with PCB-B" =)

Cheers,
Anders