A
amdx
Guest
I have a CZH-05B FM transmitter. It recently went low power. It will
transmit but not more than 20ft. I looked in and found an over heated
resistor, maybe two, they are close together, a shorted transistor and a
9 volt regulator putting out 10.8V.
I made an assumption that the output transistor was OK since it did
transmit, and these parts were in the predrive circuitry.
I ordered the parts, installed them and not much change in the signal,
I think there is a little more output but it's still not right.
So I opened and checked the 9v regulator output. Hmm, it 11.x volts
output.
The part I removed is labeled 78L09, it is an sot89 part. The part I
order is the same. The part I got is labeled 8H612. I'm not sure it is
the right part. I have searched for an 8H612 and find nothing. The part
I ordered is supposed to be a ST Micro part. I don't know how they mark
their parts, But I expect it would say 78L09. I will try to call
tomorrow and verify. uh, Monday.
The second problem, I should have checked the output transistor,
it is shorted. The part on the transistor is K2 092, Marked K2 and then
under that is the 092.
I have a second unit that has the output transistor marked K2 021.
These are surface mount transistors, I can not find any information on
these transistors.
Help with either problem appreciated.
Mikek
transmit but not more than 20ft. I looked in and found an over heated
resistor, maybe two, they are close together, a shorted transistor and a
9 volt regulator putting out 10.8V.
I made an assumption that the output transistor was OK since it did
transmit, and these parts were in the predrive circuitry.
I ordered the parts, installed them and not much change in the signal,
I think there is a little more output but it's still not right.
So I opened and checked the 9v regulator output. Hmm, it 11.x volts
output.
The part I removed is labeled 78L09, it is an sot89 part. The part I
order is the same. The part I got is labeled 8H612. I'm not sure it is
the right part. I have searched for an 8H612 and find nothing. The part
I ordered is supposed to be a ST Micro part. I don't know how they mark
their parts, But I expect it would say 78L09. I will try to call
tomorrow and verify. uh, Monday.
The second problem, I should have checked the output transistor,
it is shorted. The part on the transistor is K2 092, Marked K2 and then
under that is the 092.
I have a second unit that has the output transistor marked K2 021.
These are surface mount transistors, I can not find any information on
these transistors.
Help with either problem appreciated.
Mikek