fit a standard PC power supply into a 19" rack

[Bob MacDonald]

I can't fit a standard PC power supply into a 19" rack enclosure that I
have(it's only about 1.5" high). Where can I source a low profile AC/DC
power supply that will fit into this enclosure? Also, the fan cutouts on
the enclosure are near the right side on the rear panel, so the fan on the
power supply would need to mate with this cutout.

Thanks, Bob

 

[Simon Peacock]

There are a number of suppliers supplying rack mounting low power PC power
supplies... we use 24V, 48V and 110/230V versions but only 100 watts. These
will all fit in a 1U rack. Do a hunt on 1U +PSU on google

Simon


"Bob MacDonald" <bobtheengineer_9@hotmail.com> wrote in message
newsK5qc.41314$Np3.1757696@ursa-nb00s0.nbnet.nb.ca...

I can't fit a standard PC power supply into a 19" rack enclosure that I
have(it's only about 1.5" high). Where can I source a low profile AC/DC
power supply that will fit into this enclosure? Also, the fan cutouts on
the enclosure are near the right side on the rear panel, so the fan on the
power supply would need to mate with this cutout.

Thanks, Bob

 

[Frank]

Don't worry about the power supply. I've used Protocase (I think it's
www.protocase.com) to build custom rack enclosures. They'll do any
height to accomodate your power supply and will put whatever cutouts
you need wherever you need them. Price is reasonable and they're
quick. It only takes a couple of days to get my enclosures done.


"Simon Peacock" <nowhere@to.be.found> wrote in message news:<40a9e5f1$1@news.actrix.gen.nz>...

There are a number of suppliers supplying rack mounting low power PC power
supplies... we use 24V, 48V and 110/230V versions but only 100 watts. These
will all fit in a 1U rack. Do a hunt on 1U +PSU on google

Simon


"Bob MacDonald" <bobtheengineer_9@hotmail.com> wrote in message
newsK5qc.41314$Np3.1757696@ursa-nb00s0.nbnet.nb.ca...
I can't fit a standard PC power supply into a 19" rack enclosure that I
have(it's only about 1.5" high). Where can I source a low profile AC/DC
power supply that will fit into this enclosure? Also, the fan cutouts on
the enclosure are near the right side on the rear panel, so the fan on the
power supply would need to mate with this cutout.

Thanks, Bob

 

[Frank]

Bob,

Don't worry about the power supply. I've used Protocase (I think it's
www.protocase.com) to build custom rack enclosures. They'll do any
height to accomodate your power supply and will put whatever cutouts
you need wherever you need them. Price is reasonable and they're
quick. It only takes a couple of days to get my enclosures done.

Frank



"Simon Peacock" <nowhere@to.be.found> wrote in message news:<40a9e5f1$1@news.actrix.gen.nz>...

There are a number of suppliers supplying rack mounting low power PC power
supplies... we use 24V, 48V and 110/230V versions but only 100 watts. These
will all fit in a 1U rack. Do a hunt on 1U +PSU on google

Simon


"Bob MacDonald" <bobtheengineer_9@hotmail.com> wrote in message
newsK5qc.41314$Np3.1757696@ursa-nb00s0.nbnet.nb.ca...
I can't fit a standard PC power supply into a 19" rack enclosure that I
have(it's only about 1.5" high). Where can I source a low profile AC/DC
power supply that will fit into this enclosure? Also, the fan cutouts on
the enclosure are near the right side on the rear panel, so the fan on the
power supply would need to mate with this cutout.

Thanks, Bob

 

[arm developer]

http://www.web7days.com/1U



"Frank" <designerfreak@hotmail.com>
??????:aa6052cf.0405180647.24a51d19@posting.google.com...

Bob,

Don't worry about the power supply. I've used Protocase (I think it's
www.protocase.com) to build custom rack enclosures. They'll do any
height to accomodate your power supply and will put whatever cutouts
you need wherever you need them. Price is reasonable and they're
quick. It only takes a couple of days to get my enclosures done.

Frank



"Simon Peacock" <nowhere@to.be.found> wrote in message
news:<40a9e5f1$1@news.actrix.gen.nz>...
There are a number of suppliers supplying rack mounting low power PC
power
supplies... we use 24V, 48V and 110/230V versions but only 100 watts.
These
will all fit in a 1U rack. Do a hunt on 1U +PSU on google

Simon


"Bob MacDonald" <bobtheengineer_9@hotmail.com> wrote in message
newsK5qc.41314$Np3.1757696@ursa-nb00s0.nbnet.nb.ca...
I can't fit a standard PC power supply into a 19" rack enclosure that
I
have(it's only about 1.5" high). Where can I source a low profile
AC/DC
power supply that will fit into this enclosure? Also, the fan cutouts
on
the enclosure are near the right side on the rear panel, so the fan on
the
power supply would need to mate with this cutout.

Thanks, Bob