Film cap identification

[Andre Majorel]

Parallelepipedic film cap, pale yellow, lead pitch .4", made in
the early nineties :

http://www.teaser.fr/~amajorel/xtramix/f/film_caps.jpg

100 nF 5% 160 V presumably. But which dieletric ? PP ? PET ?
Metallised film or film-foil ?

I may have to replace them. One of them is quite microphonic.
There is crackling in one channel and this might be the culprit.

Thanks in advance.

--
André Majorel http://www.teaser.fr/~amajorel/
Endless variations make it all seem new
Can you recognise the patterns that you find ?

 

[Andre Majorel]

On 2014-08-28, Tilmann Reh <usenet2007nospam@autometer.de> wrote:

Andre Majorel schrieb:

Parallelepipedic film cap, pale yellow, lead pitch .4", made in
the early nineties :

http://www.teaser.fr/~amajorel/xtramix/f/film_caps.jpg

100 nF 5% 160 V presumably. But which dieletric ? PP ? PET ?
Metallised film or film-foil ?

Appearance, color and typeface look like from Arcotronics (meanwhile
bought by Kemet). The "J" character indeed specifies 5% tolerance.

Maybe you look at the Kemet datasheets to find one matching your specs
in this particular case size. Take care - case colors were changed
several years ago, so don't try too hard to find a color match.

The Arcotronics/Kemet R60IF3100AA6AJ has the same appearance and
dimensions.

http://www.digikey.com/product-detail/en/R60IF3100AA6AJ/399-9675-ND/3724670

Stacked metallised polyester, 100 nF 5% 160 VAC. Thanks, you and
Alf just saved me hours of searching.

--
André Majorel http://www.teaser.fr/~amajorel/
Endless variations make it all seem new
Can you recognise the patterns that you find ?

 

[Tilmann Reh]

Andre Majorel schrieb:

Parallelepipedic film cap, pale yellow, lead pitch .4", made in
the early nineties :

http://www.teaser.fr/~amajorel/xtramix/f/film_caps.jpg

100 nF 5% 160 V presumably. But which dieletric ? PP ? PET ?
Metallised film or film-foil ?

Appearance, color and typeface look like from Arcotronics (meanwhile
bought by Kemet). The "J" character indeed specifies 5% tolerance.

Maybe you look at the Kemet datasheets to find one matching your specs
in this particular case size. Take care - case colors were changed
several years ago, so don't try too hard to find a color match.

HTH, Tilmann

 

[Alf.]

Look like 100nF 5% 160V MKT capacitor.


"Andre Majorel" <cheney@halliburton.com> escribió en el mensaje
news:slrnlvuf4d.30o.cheney@atc5.vermine.org...

Parallelepipedic film cap, pale yellow, lead pitch .4", made in
the early nineties :

http://www.teaser.fr/~amajorel/xtramix/f/film_caps.jpg

100 nF 5% 160 V presumably. But which dieletric ? PP ? PET ?
Metallised film or film-foil ?

I may have to replace them. One of them is quite microphonic.
There is crackling in one channel and this might be the culprit.

Thanks in advance.

--
André Majorel http://www.teaser.fr/~amajorel/
Endless variations make it all seem new
Can you recognise the patterns that you find ?