Ferguson Tuned out

A

auntie_biotic

Guest
I Have a Ferguson tv about 6 years old, tried to tune in a video channel
through hand set, no tuning info came up on screen, now I cannot get any
channels at all, just snow, the tv just has two small red lines where the
channel number usually appears, tried turning off from the mains hoping it
would reset but nothing just the two red lines. question .Is there a
sequence off buttons on the hand set that I can press to reset the tv.The
hand set has PR CH and I with four buttons below red , green , yellow ,
blue. any help appreciated the kids are going nuts

--
auntie_biotic
http://www.tbandu.co.uk
 
what writing do you get on the screen when you press
PR
CH
red
green
yellow
blue
buttons in turn?

Note: CH stands for Channel that is the frequency channel number of the TV
station.
and PR stands for program number.


"auntie_biotic" <sr@kaysi.freeserve.co.uk> wrote in message
news:bka2p8$g6l$1@newsg2.svr.pol.co.uk...
: I Have a Ferguson tv about 6 years old, tried to tune in a video channel
: through hand set, no tuning info came up on screen, now I cannot get any
: channels at all, just snow, the tv just has two small red lines where the
: channel number usually appears, tried turning off from the mains hoping it
: would reset but nothing just the two red lines. question .Is there a
: sequence off buttons on the hand set that I can press to reset the tv.The
: hand set has PR CH and I with four buttons below red , green , yellow ,
: blue. any help appreciated the kids are going nuts
:
: --
: auntie_biotic
: http://www.tbandu.co.uk
:
:
 
Dont understand your meaning. Do not see anything bar "snow". I cannot get
the tv to respond to remote at all.
PS Have changed batteries

--
auntie_biotic
http://www.tbandu.co.uk
"Eric" <some1@clare.co.nz> wrote in message news:3f68ac75@clear.net.nz...
what writing do you get on the screen when you press
PR
CH
red
green
yellow
blue
buttons in turn?

Note: CH stands for Channel that is the frequency channel number of the TV
station.
and PR stands for program number.


"auntie_biotic" <sr@kaysi.freeserve.co.uk> wrote in message
news:bka2p8$g6l$1@newsg2.svr.pol.co.uk...
: I Have a Ferguson tv about 6 years old, tried to tune in a video channel
: through hand set, no tuning info came up on screen, now I cannot get any
: channels at all, just snow, the tv just has two small red lines where
the
: channel number usually appears, tried turning off from the mains hoping
it
: would reset but nothing just the two red lines. question .Is there a
: sequence off buttons on the hand set that I can press to reset the
tv.The
: hand set has PR CH and I with four buttons below red , green , yellow ,
: blue. any help appreciated the kids are going nuts
:
: --
: auntie_biotic
: http://www.tbandu.co.uk
:
:
 
drats on it then


"auntie_biotic" <sr@kaysi.freeserve.co.uk> wrote in message
news:bkad4c$dgh$1@news6.svr.pol.co.uk...
: Dont understand your meaning. Do not see anything bar "snow". I cannot
get
: the tv to respond to remote at all.
: PS Have changed batteries
 

Welcome to EDABoard.com

Sponsor

Back
Top