Fender SPL 9000 , 1997 slave amp

N

N_Cook

Guest
About half the solder joints on the input sub-board are bad. A .25 and M&F
XLR each ch with no obvious reason why, as all sockets are individually
fixed to stout chassis metal . Even the never been used quarter inch sockets
have bad solder joints. The solder looks good otherwise.
 
Probably the sockets were soldered onto the pcb without laying on a jig. So
misaligned when fixed onto chassis. So inbuilt stress in board combined with
the board being in the internal hot air flow to the fan
 
unbalanced "reference planes". insulated 1/4 in i/p sockets . Lipped
insulator washer and star washer inside chassis but only the insulator
washer packing lines up with XLR rear faces, just that 1/10 inch or less
enough to stress the board/solder
 
N_Cook wrote:
About half the solder joints on the input sub-board are bad. A .25 and M&F
XLR each ch with no obvious reason why, as all sockets are individually
fixed to stout chassis metal . Even the never been used quarter inch sockets
have bad solder joints. The solder looks good otherwise.
Don't assume that the solder is good based on looks. If you saw Sitre
Magana at the Post Office for the first time, you would automatically
assume that he isn't about to start pounding his pud right in front of you.

LV
--


"I rode a tank and held a general's rank
When the blitzkrieg raged and the bodies stank."

---Sympathy for the Devil-The Rolling Stones
--------------------------------------------

"Only a male compensating for his impotence
would accuse a strong woman of being a lesbian."

---Unknown
----------------------------------------------

"It's a sign of your own worth sometimes if you are
hated by the right people."

---Miles Franklin
----------------------------------------------

See the latest idiot featured on my blog!

My Blog http://ladyveteranslog.blogspot.com
---------------------------------------------
Are you being harassed on Usenet and want to fight
back instead of leaving the net? Are you willing to
stand up to Internet bullies and stalkers?

Join my group http://groups.yahoo.com/group/antiCHU
----------------------------------------------
 

Welcome to EDABoard.com

Sponsor

Back
Top