R
Remi
Guest
Hello everybody,
I would like to use the MAX038 as a sinewave generator. The output
must be in constant phase with an external square wave signal: phase
between output and input = 0ş = constant within the lock range. My
input signal will change from ~1MHz to ~1.5MHz.
Can I use the Phase Comparator 2 of the PLL4046 as external phase
detector for the MAX038 and then have the requirements that I desire?
In the data sheet of the MAX038 figure 5, there is a "frequency phase
detector", but I am not sure this is identical to the Phase Comparator
2 of the 4046. (figure 4 shows a phase detector similar to the phase
comparator 1 of the 4046, but I don't want to use that one).
Thank for your answer
Remi
I would like to use the MAX038 as a sinewave generator. The output
must be in constant phase with an external square wave signal: phase
between output and input = 0ş = constant within the lock range. My
input signal will change from ~1MHz to ~1.5MHz.
Can I use the Phase Comparator 2 of the PLL4046 as external phase
detector for the MAX038 and then have the requirements that I desire?
In the data sheet of the MAX038 figure 5, there is a "frequency phase
detector", but I am not sure this is identical to the Phase Comparator
2 of the 4046. (figure 4 shows a phase detector similar to the phase
comparator 1 of the 4046, but I don't want to use that one).
Thank for your answer
Remi