Extend the life the TV lamp

Guest
Does anyone know why the lamp goes out? My TV's lamp failed after 2
1/2 years. I disassembled the lamp all the way to the wires to figure
out what is wrong with it. I have concluded that the lamp is filled
with inert gas and sealed with a cheap white compound, after this
white compound is exposed to heat over many hours; it will
disintegrate, cracks, and let the gas to escape leading to lamp to
fail. Solution: SONY should seal the lamp using glass type seal that
is used on the old type household light bulb. The lamp life should be
extended to >50,000 hr.
 
I assume this is a joke. Lamps go out because the filament eventually burns
through.
 
William Sommerwerck wrote:

I assume this is a joke. Lamps go out because the filament eventually burns
through.
I imagine he meant a cold cathode type backlight for illuminating LCDs.

Graham
 
"William Sommerwerck" <grizzledgeezer@comcast.net> wrote in message
news:tc-dnZNcu-kZbmLbnZ2dnUVZ_tSknZ2d@comcast.com...
I assume this is a joke. Lamps go out because the filament eventually burns
through.

There won't be an incandescent lamp in a TV.

Cold cathode fluorescent lamps fail because the cathodes wear out, usually
the phosphor is depreciated by then as well.

UHP lamps in DLP and LCD sets fail because the quartz arc tube devitrifies,
they run about 3,000 PSI in operation and will fail catastrophically if run
too far past rated life.
 
"James Sweet" <jamessweet@hotmail.com> wrote in message
news:fTULi.409$R%1.136@trndny06...
"William Sommerwerck" <grizzledgeezer@comcast.net> wrote in message
news:tc-dnZNcu-kZbmLbnZ2dnUVZ_tSknZ2d@comcast.com...

UHP lamps in DLP and LCD sets fail because the quartz arc tube
devitrifies...
My ignorance is showing
 
eliaselhossari@gmail.com wrote in news:1191176728.554453.168250@
22g2000hsm.googlegroups.com:

I have concluded that the lamp is filled
with inert gas and sealed with a cheap white compound, after this
white compound is exposed to heat over many hours; it will
disintegrate, cracks,


The white compound does not seal the contents of the bulb inside it. It
just adheres it to the reflector and other works.
 
eliaselhossari@gmail.com wrote:
Does anyone know why the lamp goes out? My TV's lamp failed after 2
1/2 years. I disassembled the lamp all the way to the wires to figure
Troll
posting-account=ps2QrAMAAAA6_jCuRt2JEIpn5Otqf_w0

--
Adrian C
 
Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?
"Adrian C" <email@here.invalid> wrote in message
news:5mcg3dFcq0r6U1@mid.individual.net...
eliaselhossari@gmail.com wrote:
Does anyone know why the lamp goes out? My TV's lamp failed after 2
1/2 years. I disassembled the lamp all the way to the wires to figure

Troll
posting-account=ps2QrAMAAAA6_jCuRt2JEIpn5Otqf_w0

--
Adrian C
 
"Art" <plotsligt@comcast.net> wrote in message
news:YOqdnV4h4cBIUpXanZ2dnUVZ_u-unZ2d@comcast.com...
Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?

There's very little mercury in one of those lamps. I wouldn't sprinkle it in
my food, but there's no need for the paranoia about it either. An old
thermometer contains hundreds of times the mercury.
 
James Sweet wrote:

"Art" <plotsligt@comcast.net> wrote in message

Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?

There's very little mercury in one of those lamps. I wouldn't sprinkle it in
my food, but there's no need for the paranoia about it either. An old
thermometer contains hundreds of times the mercury.
Our silly excessively risk-averse society has demonised such things without
adequate reason.

Now, if you were mining the stuff, that was different.
http://en.wikipedia.org/wiki/Almadén

Graham
 
"James Sweet" <jamessweet@hotmail.com> writes:

"Art" <plotsligt@comcast.net> wrote in message
news:YOqdnV4h4cBIUpXanZ2dnUVZ_u-unZ2d@comcast.com...
Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?

There's very little mercury in one of those lamps. I wouldn't sprinkle it in
my food, but there's no need for the paranoia about it either. An old
thermometer contains hundreds of times the mercury.
There's such paranoia about mercury when so many common chemicals are
much more hazardous.....

I used to play with mercury as a kid and look what happened... I turned
into an engineer. Ooops. :)

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
 
On Mon, 08 Oct 2007 08:19:05 -0400, Sam Goldwasser wrote:

"James Sweet" <jamessweet@hotmail.com> writes:

"Art" <plotsligt@comcast.net> wrote in message
news:YOqdnV4h4cBIUpXanZ2dnUVZ_u-unZ2d@comcast.com...
Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?

There's very little mercury in one of those lamps. I wouldn't sprinkle it in
my food, but there's no need for the paranoia about it either. An old
thermometer contains hundreds of times the mercury.

There's such paranoia about mercury when so many common chemicals are
much more hazardous.....

I used to play with mercury as a kid and look what happened... I turned
into an engineer. Ooops. :)
Small amounts of mercury can be biologically manipulated into much more
hazardous forms like methyl mercury. This has happened several times in
history resulting in the poisoning of thousands of people.
 
Eeyore <rabbitsfriendsandrelations@hotmail.com> wrote:
James Sweet wrote:

"Art" <plotsligt@comcast.net> wrote in message

Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?

There's very little mercury in one of those lamps. I wouldn't sprinkle it in
my food, but there's no need for the paranoia about it either. An old
thermometer contains hundreds of times the mercury.

Our silly excessively risk-averse society has demonised such things without
adequate reason.
I believe that a large part of the problem is that the current crop of
journalists are almost totally ignorant of science and technology,
even perhaps to the point of being afraid of them. Add all sorts of
advocacy groups that invent their own "science" in support of their
causes and you get our current situation.

Jerry
 
Jerry Peters wrote:

Eeyore <rabbitsfriendsandrelations@hotmail.com> wrote:
James Sweet wrote:
"Art" <plotsligt@comcast.net> wrote in message

Certianly hope you did not mind handling the mercury (HG) during that
procedure, BTW did you do in on the kitchen table also?

There's very little mercury in one of those lamps. I wouldn't sprinkle it in
my food, but there's no need for the paranoia about it either. An old
thermometer contains hundreds of times the mercury.

Our silly excessively risk-averse society has demonised such things without
adequate reason.

I believe that a large part of the problem is that the current crop of
journalists are almost totally ignorant of science and technology,
even perhaps to the point of being afraid of them. Add all sorts of
advocacy groups that invent their own "science" in support of their
causes and you get our current situation.
In addition to ignorance you can add 'can't be bothered to research' to the list of
skills held by journalists today. They'll happily reprint any old nonsense they're
spoon fed.

Graham
 
Sam Goldwasser wrote:
There's such paranoia about mercury when so many common chemicals are
much more hazardous.....

I used to play with mercury as a kid and look what happened... I turned
into an engineer. Ooops. :)

You KNOW that you're not supposed to admit that online, Sam! ;-)


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida
 

Welcome to EDABoard.com

Sponsor

Back
Top