Expro 80

O

Odie

Guest
hi folks,
do someone have an schematic for an expro80 epromprogramer?

thank,

michael
 
you can find it here
http://matthieu.benoit.free.fr/all03/source.htm
especially this file :
http://matthieu.benoit.free.fr/all03/source/expro80.zip
Note you will find more and other information about this programmer
as a WIN XP/2000/NT driver for this programmer
regards,
MB
Odie wrote:
hi folks,
do someone have an schematic for an expro80 epromprogramer?

thank,

michael
Click to expand...
 
On Mon, 26 Apr 2004 18:48:33 +0200, Matthieu Benoit
<matthieu.benoit@free.fr> put finger to keyboard and composed:

you can find it here
http://matthieu.benoit.free.fr/all03/source.htm
especially this file :
http://matthieu.benoit.free.fr/all03/source/expro80.zip
Note you will find more and other information about this programmer
as a WIN XP/2000/NT driver for this programmer
regards,
MB
Click to expand...
I was of the understanding that the Expro-80/60 SAC201 ISA interface
card does not behave well in some 486 PCs and above. Do you have any
experience to the contrary? I am keeping my 486 DX2/66 box alive just
for this purpose. I do notice that the Expro-60 software does not run
reliably in a Win95 DOS window.

Odie wrote:

hi folks,
do someone have an schematic for an expro80 epromprogramer?

thank,

michael
Click to expand...

- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
 
for me I use a AMD K6 350 WIN98 with a SAC201 card with an ALL03
programmer
which is same than the EXPRO60 and I have never noticed any problem
I have also tested it with a Celeron 333 with Windows XP and patched
software and it works with no problem also.
perhaps there are different release of the SAC201 board ?
I do not know further.
MB
Franc Zabkar wrote:
On Mon, 26 Apr 2004 18:48:33 +0200, Matthieu Benoit
matthieu.benoit@free.fr> put finger to keyboard and composed:

you can find it here
http://matthieu.benoit.free.fr/all03/source.htm
especially this file :
http://matthieu.benoit.free.fr/all03/source/expro80.zip
Note you will find more and other information about this programmer
as a WIN XP/2000/NT driver for this programmer
regards,
MB

I was of the understanding that the Expro-80/60 SAC201 ISA interface
card does not behave well in some 486 PCs and above. Do you have any
experience to the contrary? I am keeping my 486 DX2/66 box alive just
for this purpose. I do notice that the Expro-60 software does not run
reliably in a Win95 DOS window.

Odie wrote:

hi folks,
do someone have an schematic for an expro80 epromprogramer?

thank,

michael

- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
Click to expand...
 
On Wed, 28 Apr 2004 19:00:16 +0200, Matthieu Benoit
<matthieu.benoit@free.fr> put finger to keyboard and composed:

for me I use a AMD K6 350 WIN98 with a SAC201 card with an ALL03
programmer
which is same than the EXPRO60 and I have never noticed any problem
I have also tested it with a Celeron 333 with Windows XP and patched
software and it works with no problem also.
perhaps there are different release of the SAC201 board ?
I do not know further.
MB
Click to expand...
Here is some info from Robert Madsen's site:

==================================================================
Q: When reading an AMD MPU like D8753H or 80C32 ITL we get a wrong
(different) checksum everytime the same MPU is loaded.

A (by Sunshine): The CPU speed too fast or the textool dusty could get
the different checksum.
==================================================================

==================================================================
http://www.danbbs.dk/~rmadrm/error.htm
The software do not work on my Pentium IIII 800MHz MMX-GST-TURBO
computer

There is NO solution! You cannot run the software on Pentium II or
Pentium above 233 MHz computers because the software is developed a
few years ago when we all had 486 computers. You will get a 'runtime
error - divide by 0' message. (caused by bad programming; using loops
instead of a timer or something like that).

Expro-60/80 only:
If you get the 'runtime error' when using software V8.40 then try to
use the V1.50 software instead as your only software (Normally I tell
people to use both V8.40 and V1.50 software).
==================================================================

Franc Zabkar wrote:

On Mon, 26 Apr 2004 18:48:33 +0200, Matthieu Benoit
matthieu.benoit@free.fr> put finger to keyboard and composed:

you can find it here
http://matthieu.benoit.free.fr/all03/source.htm
especially this file :
http://matthieu.benoit.free.fr/all03/source/expro80.zip
Note you will find more and other information about this programmer
as a WIN XP/2000/NT driver for this programmer
regards,
MB

I was of the understanding that the Expro-80/60 SAC201 ISA interface
card does not behave well in some 486 PCs and above. Do you have any
experience to the contrary? I am keeping my 486 DX2/66 box alive just
for this purpose. I do notice that the Expro-60 software does not run
reliably in a Win95 DOS window.

Odie wrote:

hi folks,
do someone have an schematic for an expro80 epromprogramer?

thank,

michael

- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
Click to expand...

- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
 
Yes but I confirm with the patched software V8.40 it must work
on fast machines.
I am sorry I haven't so fast machine myself, but if you can do the
test tell me.
MB.

Franc Zabkar wrote:
On Wed, 28 Apr 2004 19:00:16 +0200, Matthieu Benoit
matthieu.benoit@free.fr> put finger to keyboard and composed:

for me I use a AMD K6 350 WIN98 with a SAC201 card with an ALL03
programmer
which is same than the EXPRO60 and I have never noticed any problem
I have also tested it with a Celeron 333 with Windows XP and patched
software and it works with no problem also.
perhaps there are different release of the SAC201 board ?
I do not know further.
MB

Here is some info from Robert Madsen's site:

==================================================================
Q: When reading an AMD MPU like D8753H or 80C32 ITL we get a wrong
(different) checksum everytime the same MPU is loaded.

A (by Sunshine): The CPU speed too fast or the textool dusty could get
the different checksum.
==================================================================

==================================================================
http://www.danbbs.dk/~rmadrm/error.htm
The software do not work on my Pentium IIII 800MHz MMX-GST-TURBO
computer

There is NO solution! You cannot run the software on Pentium II or
Pentium above 233 MHz computers because the software is developed a
few years ago when we all had 486 computers. You will get a 'runtime
error - divide by 0' message. (caused by bad programming; using loops
instead of a timer or something like that).

Expro-60/80 only:
If you get the 'runtime error' when using software V8.40 then try to
use the V1.50 software instead as your only software (Normally I tell
people to use both V8.40 and V1.50 software).
==================================================================

Franc Zabkar wrote:

On Mon, 26 Apr 2004 18:48:33 +0200, Matthieu Benoit
matthieu.benoit@free.fr> put finger to keyboard and composed:

you can find it here
http://matthieu.benoit.free.fr/all03/source.htm
especially this file :
http://matthieu.benoit.free.fr/all03/source/expro80.zip
Note you will find more and other information about this programmer
as a WIN XP/2000/NT driver for this programmer
regards,
MB

I was of the understanding that the Expro-80/60 SAC201 ISA interface
card does not behave well in some 486 PCs and above. Do you have any
experience to the contrary? I am keeping my 486 DX2/66 box alive just
for this purpose. I do notice that the Expro-60 software does not run
reliably in a Win95 DOS window.

Odie wrote:

hi folks,
do someone have an schematic for an expro80 epromprogramer?

thank,

michael

- Franc Zabkar
--
Please remove one 's' from my address when replying by email.

- Franc Zabkar
--
Please remove one 's' from my address when replying by email.
Click to expand...
 
You must log in or register to reply here.

Welcome to EDABoard.com

Sponsor

Back
Top